[Hackrf-dev] hackrf_usb.bin needed

[hackgnar]

Also, you may want to try the following command to install the dfu image manually.  I always run "make program", but according to the make file, this is what is executed:

dfu-util --device 1fc9:000c --alt 0 --download hackrf_usb.dfu

I hope this works for you Graham,  pulling out your hair is no fun, but its awesome when you finally figure it out.

Ryan

On Jul 31, 2013, at 11:39 PM, Michael Ossmann <mike at ossmann.com> wrote:


> It has been pointed out to me that you may need hackrf_usb.dfu instead.

> (attached)

> 

> 

> On Wed, Jul 31, 2013 at 10:19:47PM -0600, Michael Ossmann wrote:

>> 

>> hackrf_usb.bin attached

>> 

>> On Wed, Jul 31, 2013 at 08:02:18PM +1000, Graham Cottew wrote:

>>> 

>>> After many hours and torn out hair I still am struggling with getting all the dependancies in place to allow 'make program' running here from the hackrf_usb directory.

>>> 

>>> I do however have dfu-util installed and it can see my bricked Jawbreaker in DFU mode on a USB port.

>>> Can someone please mail me a current hackrf_usb.bin so that I may attempt to upload it to the Jawbreaker?

>>> 

>>> Any tricks for the uninitiated would be appreciated.

>>> 

>>> I am guessing that I can do this with a 

>>> dfu-util -D hackrf_usb.bin 

>>> 

>>> Do I need to use any other options, or to specify the Altsetting of the DFU Interface using -a?

>>> 

> 

> 

>> _______________________________________________

>> HackRF-dev mailing list

>> HackRF-dev at greatscottgadgets.com

>> http://nine.pairlist.net/mailman/listinfo/hackrf-dev

> 

> <hackrf_usb.dfu>_______________________________________________

> HackRF-dev mailing list

> HackRF-dev at greatscottgadgets.com

> http://nine.pairlist.net/mailman/listinfo/hackrf-dev