[Hackrf-dev] Jawbreaker reflow problems

[Adam Laurie]

Hi guys,

A while ago there was a thread about poor performance on some boards, 
and it came down to a suggestion that the fix was to reflow some 
specific components.

However, we've now examined the two boards we've got under a microscope, 
and it seems that a large percentage of connections need reflowing, not 
just one or two components, and so doing it by hand is simply not 
practical as the very small ones will get blown away. Accordingly, we'd 
like to reflow in an oven, but to do so we need to know the correct 
profile - is that something we can get from the original manufacturing 
order?

BTW, once we've done ours and proved it works OK, we'll happily do the 
same for anyone who wants to ship their board to us.

thanks,
Adam
-- 
Adam Laurie                         Tel: +44 (0) 20 7993 2690
Aperture Labs Ltd.                  Fax: +44 (0) 20 8972 9377
Suite 117, Pegaxis House
61 Victoria Road
Surbiton
Surrey                              mailto:adam at aperturelabs.com
KT6 4JX                             http://aperturelabs.com
UNITED KINGDOM