[Hackrf-dev] Jawbreaker reflow problems

[Michael Ossmann]

I'm trying to get documentation of the temperature curve used on
Jawbreaker, but that information is a couple of entities removed from
me.


On Thu, Dec 19, 2013 at 11:10:29AM +0000, Adam Laurie wrote:

>

> Hi guys,

> 

> A while ago there was a thread about poor performance on some boards, 

> and it came down to a suggestion that the fix was to reflow some 

> specific components.

> 

> However, we've now examined the two boards we've got under a microscope, 

> and it seems that a large percentage of connections need reflowing, not 

> just one or two components, and so doing it by hand is simply not 

> practical as the very small ones will get blown away. Accordingly, we'd 

> like to reflow in an oven, but to do so we need to know the correct 

> profile - is that something we can get from the original manufacturing 

> order?

> 

> BTW, once we've done ours and proved it works OK, we'll happily do the 

> same for anyone who wants to ship their board to us.

> 

> thanks,

> Adam

> -- 

> Adam Laurie                         Tel: +44 (0) 20 7993 2690

> Aperture Labs Ltd.                  Fax: +44 (0) 20 8972 9377

> Suite 117, Pegaxis House

> 61 Victoria Road

> Surbiton

> Surrey                              mailto:adam at aperturelabs.com

> KT6 4JX                             http://aperturelabs.com

> UNITED KINGDOM

> _______________________________________________

> HackRF-dev mailing list

> HackRF-dev at greatscottgadgets.com

> http://nine.pairlist.net/mailman/listinfo/hackrf-dev