[Hackrf-dev] HackRF Hang while Tuning with GQRX
Russell Hande
zefie at persona.cc
Thu Jun 27 08:56:39 EDT 2013
It went pretty fast! I have an i7 3770 myself. I didn't time the
actual process of going from 88 to 6GHz, I just ran the script with
the linux 'time' command. It looped around about 5 or 6 times. I
wasn't watching it 100% of the time, sorry.
On Thu, Jun 27, 2013 at 8:51 AM, Mike Jameson <mike at scanoo.com> wrote:
> I haven't managed to reach 6GHz once with it yet. If you disable the FFT or
> reduce the FFT refresh rate, your pc may then be quickened up enough to
> cause the crash? I'm running an i7 quad core here.
>
> I'll try with a slower machine in a bit.
>
>
> Mike
>
> --
> Mike Jameson M0MIK BSc MIET
> Email: mike at scanoo.com
> Web: http://scanoo.com
>
>
> On Thu, Jun 27, 2013 at 1:49 PM, Russell Hande <zefie at persona.cc> wrote:
>>
>> I canceled it after 9 min, 23 seconds, it did not lock up. I wonder if
>> the USB chipset is a factor? My chipset is the Intel Z77, and the
>> HackRF is on a USB2 port.
>>
>> On Thu, Jun 27, 2013 at 8:40 AM, Russell Hande <zefie at persona.cc> wrote:
>> > I'm really bad at forgetting to set reply all in GMail. I booted into
>> > my LiveDVD to test this so that virtualization wasn't a factor. I am
>> > running 2013.06.1. I will report back if it crashes, but so far it has
>> > looped around past 6GHz twice, so perhaps the issue I was having in
>> > SDRSharp is just with my plugin.
>> >
>> > On Thu, Jun 27, 2013 at 8:29 AM, Mike Jameson <mike at scanoo.com> wrote:
>> >> I meant to say that it is compatible with GNU Radio 3.6.5.
>> >>
>> >> My record is 22 seconds at the moment :)
>> >>
>> >>
>> >> Mike
>> >>
>> >> --
>> >> Mike Jameson M0MIK BSc MIET
>> >> Email: mike at scanoo.com
>> >> Web: http://scanoo.com
>> >>
>> >>
>> >> On Thu, Jun 27, 2013 at 1:23 PM, Mike Jameson <mike at scanoo.com> wrote:
>> >>>
>> >>> Hi Russell,
>> >>>
>> >>> Here is a GRC flowgraph I just put together which can reproduce the
>> >>> issue
>> >>> within a minute by cycling the center frequency.
>> >>>
>> >>> Ready to run with GNU Radio 3.5 (maint branch) built by default with
>> >>> the
>> >>> build-gnuradio script.
>> >>>
>> >>>
>> >>> Cheers,
>> >>>
>> >>> Mike
>> >>>
>> >>> --
>> >>> Mike Jameson M0MIK BSc MIET
>> >>> Email: mike at scanoo.com
>> >>> Web: http://scanoo.com
>> >>>
>> >>>
>> >>> On Thu, Jun 27, 2013 at 1:19 PM, Russell Hande <zefie at persona.cc>
>> >>> wrote:
>> >>>>
>> >>>> Sorry, I should also mention that it is hit or miss, it doesn't
>> >>>> always
>> >>>> happen. If I can pinpoint a specific cause that triggers it, I will
>> >>>> update.
>> >>>>
>> >>>> On Thu, Jun 27, 2013 at 8:14 AM, Russell Hande <zefie at persona.cc>
>> >>>> wrote:
>> >>>> > I've seen this in SDRSharp, if I tune too rapidly it stops sending
>> >>>> > data. Though it doesn't appear to be a hard crash because stopping
>> >>>> > and
>> >>>> > restarting the plugin (closing and reopening the device) works
>> >>>> > fine.
>> >>>> > Likewise restarting GQRX should resume normal usage.
>> >>>> >
>> >>>> > On Thu, Jun 27, 2013 at 7:45 AM, Mike Jameson <mike at scanoo.com>
>> >>>> > wrote:
>> >>>> >> Hi Guys,
>> >>>> >>
>> >>>> >> With the latest git source & firmware installed I'm seeing the
>> >>>> >> HackRF
>> >>>> >> hang
>> >>>> >> using GQRX when rapidly moving the middle mouse scroller to change
>> >>>> >> frequency.
>> >>>> >>
>> >>>> >> HackRF git log:
>> >>>> >> commit bc5e683c367e5a6123dfabb5b887987c89fd8ac1
>> >>>> >> Merge: ed805dc 250d6d4
>> >>>> >> Author: Michael Ossmann <mike at ossmann.com>
>> >>>> >> Date: Wed Jun 26 21:43:16 2013 -0700
>> >>>> >>
>> >>>> >> Has anyone else seen this? I'll attempt to reproduce it using GRC
>> >>>> >> to
>> >>>> >> rule
>> >>>> >> out a bug with GQRX.
>> >>>> >>
>> >>>> >> Cheers,
>> >>>> >>
>> >>>> >> Mike
>> >>>> >>
>> >>>> >> --
>> >>>> >> Mike Jameson M0MIK BSc MIET
>> >>>> >> Email: mike at scanoo.com
>> >>>> >> Web: http://scanoo.com
>> >>>> >>
>> >>>> >> _______________________________________________
>> >>>> >> HackRF-dev mailing list
>> >>>> >> HackRF-dev at greatscottgadgets.com
>> >>>> >> http://nine.pairlist.net/mailman/listinfo/hackrf-dev
>> >>>> >>
>> >>>> _______________________________________________
>> >>>> HackRF-dev mailing list
>> >>>> HackRF-dev at greatscottgadgets.com
>> >>>> http://nine.pairlist.net/mailman/listinfo/hackrf-dev
>> >>>
>> >>>
>> >>
>
>
More information about the HackRF-dev
mailing list