[Hackrf-dev] Broken hackrf one after firmware update.

[Ulf Bertilsson]

  cmake ./ -DINSTALL_UDEV_RULES=ON
  make -j4
  sudo make install
  cd ..
  cd firmware/
  ls -la
  cd hackrf_usb/
  ls -la
  cd build/
  make -j4
  hackrf_spiflash -w hackrf_usb.bin
  cd ..
  hackrf_cpldjtag -x firmware/cpld/sgpio_if/default.xsvf

Yes!

Thanks Michael, I do better RTFM next time.

2014-12-20 20:11 GMT+01:00 Ulf Bertilsson <ulf.daniel.bertilsson at gmail.com>:

> Thanks michael.
>
> I get right at it :)
>
> --
> Ulf
>
> > Den 20. des. 2014 kl. 19:18 skrev Michael Ossmann <mike at ossmann.com>:
> >
> > You should also update the CPLD:
> >
> > https://github.com/mossmann/hackrf/wiki/Updating-Firmware
> >
> > With new firmware and old CPLD I would expect the spectrum to be
> > inverted in some cases.  A fixed frequency offset would be puzzling
> > unless it is a misinterpretation of inverted spectrum (which could be an
> > easy mistake to make).
> >
> > Mike
> >
> >
> >> On Sat, Dec 20, 2014 at 09:19:21AM +0100, Ulf Bertilsson wrote:
> >>
> >> Old firmware(that worked and came with my unit)
> >>
> >> ~/src/hackrf/firmware/hackrf_usb/build$ cat hackrf_info.txt
> >> Found HackRF board.
> >> Board ID Number: 2 (HackRF One)
> >> Firmware Version: git-44df9d1
> >> Part ID Number: 0xa000cb3c 0x005e4f54
> >>
> >> new build yesterday:
> >>
> >> ~/src/hackrf/firmware/hackrf_usb/build$ cat hackrf_info2.txt
> >> Found HackRF board.
> >> Board ID Number: 2 (HackRF One)
> >> Firmware Version: git-4e98bc6
> >> Part ID Number: 0xa000cb3c 0x005e4f54
> >> Serial Number: 0x00000000 0x00000000 0x457863c8 0x2f21441f
> >>
> >> Currently running:
> >>
> >> Found HackRF board.
> >> Board ID Number: 2 (HackRF One)
> >> Firmware Version: 2014.08.1
> >> Part ID Number: 0xa000cb3c 0x005e4f54
> >> Serial Number: 0x00000000 0x00000000 0x457863c8 0x2f21441f
> >>
> >> Gcc toolchain:
> >>
> >> gcc-arm-none-eabi-4_9-2014q4
> >>
> >> uname -a:
> >>
> >> Linux hack 3.11-2-amd64 #1 SMP Debian 3.11.8-1 (2013-11-13) x86_64
> GNU/Linux
> >>
> >> gqrx
> >> gr-osmosdr v0.1.4-2-g8d9e6b58 (0.1.5git) gnuradio 3.7.6git-188-gf60cd24f
> >> built-in source types: file fcd rtl_tcp hackrf rfspace
> >>
> >> ..
> >> cmake .. -DBOARD=HACKRF_ONE
> >> ..
> >>
> >> 2014-12-20 9:06 GMT+01:00 Ulf Bertilsson <
> ulf.daniel.bertilsson at gmail.com>:
> >>
> >>> Oh dear, my hackrf is not feeling well.
> >>>
> >>> I setup the gcc tool chains and stuff and compiled the firmware from
> got.
> >>>
> >>> I followed the readme and it went well.
> >>>
> >>> I then flashed it with hackrf_one_usb.bin file.
> >>>
> >>> All seemed well, and I reset it.
> >>>
> >>> All, well until I started up gqrx and noticed all my bookmarks are
> about
> >>> 5mhz off !?
> >>>
> >>> I also recompiled gqrx, reflashed with rebuild official firmware.
> >>>
> >>> Still all my freq are off and need ~5mhz lo to be correct.
> >>>
> >>> What have I broken ?! :/
> >>>
> >>> --
> >>> Ulf
> >
> >> _______________________________________________
> >> HackRF-dev mailing list
> >> HackRF-dev at greatscottgadgets.com
> >> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20141220/cf0a6029/attachment.html>