[Hackrf-dev] HackRF USB voltage

[Jay Bougie]

Thanks for sharing that observation.

On minor clarification to ask, what generation/release year is your Nexus 7?
On Dec 21, 2014 10:55 AM, "Charles" <cbeener at columbus.rr.com> wrote:

> I've been fighting the HackRF for some time now . I now can get it working
> with my Nexus 7.
>
>  The problem ended up to be the Nexus USB output power when it is more the
> 70% charge on the battery. the output of the power off
>
>  it is more than 5.1 volts apx 5.27 volts. and it will not connect to the
> Nexus when it is at that high of voltage.
>
>  But if we run down the Nexus 7 to 70% the voltage at the USB is low
> enough the the HackRF will connect to the Nexus 7.
>
>  I'm going to try a small resistor in series with the Plus voltage to drop
> that Nexus voltage down so it will work at full charge.
>
>    Were using the RF Analyzer program on the Nexus to play around with the
> HarkRF .
>
>    Just some info . Hope it helps someone else.
>
>  WB8LGA
>  Charles
>
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20141221/a958c2b2/attachment.html>