[Hackrf-dev] Recieving Airband on the upper 1 Ghz

[Ariel Diaz]

I have been using sdr# mainly. Antennas are a discone Diamond D3000N and WA5VJB LP 850-6500 Mhz.  In sdr# gain settings are the following LNA set to 20db, VGA set to 10db, and Amp is off. Coax is 30' Belden RG-8X YR44192. Discone antenna is mounted on a 20' mast outside and LP antenna is mounted on a 5' Tripod. I am also showing the same issues while using SDR-Radio V2 latest beta.

________________________________
From: HackRF-dev <hackrf-dev-bounces at greatscottgadgets.com> on behalf of DENNIS LYNCH <dlynch3 at virginmedia.com>
Sent: Sunday, December 28, 2014 10:48 AM
To: hackrf-dev at greatscottgadgets.com
Subject: [Hackrf-dev] Recieving Airband on the upper 1 Ghz

Can you give a little more information about your receiver setup..prior to your hachRF  antenna input and of course you have already experimented with all the various gain setting levels in your hackrf_transfer  command line  input...

Dennis Lynch
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20141228/4efeb00e/attachment.html>