[Hackrf-dev] reopening the radio before switching between send and receive

[Rich Sanders]

I"m not an engineer, so forgive my ignorance.  Couldn't you use automatic
link establishment if they were physically separated or if they were
co-located a signal generator on the clockin port?

On Wed, Oct 1, 2014 at 12:58 PM, Dennis Liang <dragonman at tmdrake.com> wrote:

> I'd like figure out how to synchronize two hackRF and get full duplex..
>
>
> -----Original Message-----
> From: HackRF-dev [mailto:hackrf-dev-bounces at greatscottgadgets.com] On
> Behalf Of Michael Ossmann
> Sent: Wednesday, October 01, 2014 9:22 AM
> To: Simon IJskes
> Cc: hackrf-dev at greatscottgadgets.com
> Subject: Re: [Hackrf-dev] reopening the radio before switching between
> send and receive
>
> On Wed, Oct 01, 2014 at 06:15:30PM +0200, Simon IJskes wrote:
> >
> > Halfduplex, i know. But not only you need to stop the tx before the rx
>
> > but you must also reopen the device. no other method will clear the
> > do_exit flag. And that does look like a bug, but it can just as easily
>
> > be intentional.
>
> If you figure out a way to do it better, patches are welcome.
>
> Thanks,
>
> Mike
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20141001/843abdb2/attachment.html>