[Hackrf-dev] Run out of options to get HackRF One working :(
Donald Pupecki
pupeckd at sunyit.edu
Thu Oct 30 15:19:34 EDT 2014
You said you have an rtl dongle. You can try connecting the hackrf to the
rtl with an sma cable and using hackrf_transfer to play out a cw signal.
This should show up on the rtl. It's not rx, but it may provide people with
some more feedback for troubleshooting if the TX is also behaving oddly.
On Oct 30, 2014 2:55 PM, <ccrypti at nym.hush.com> wrote:
> Hi Simon / All,
>
> With the antenna using the rtl usb stick i can receive FM fine. I
> thought the ANT500 is better than the standard antenna which comes
> with most of those usb dongles ? I tested the continuity of the
> ANT500 which is good. Shield and antenna have none, but the inner
> pin and antenna have continuity.
>
> Also i just installed the 2.3 beta which now displays the hackrf
> one as an option. But still no go on the usual FM frequencies, just
> noise or silence when selecting a peak.
>
> I bought also a few other antennas for specific ranges like 2.4
> Ghz. How can i use the 2.4 Ghz antenna to determine if the hackrf
> works ? I mean i can connect it and go to 2.4 Ghz, but what is a
> typical sound or view to know it is working as it should ?
>
> Thanks,
>
> Micky
>
> On Thu, 30 Oct 2014 19:05:14 +0100 "Simon Brown" <simon at sdr-
> radio.com> wrote:
> >Micky,
> >
> >You must use a better antenna unless you live right in the middle
> >of the Big City, and even then your antenna may be defective.
> >
> >Simon Brown G4ELI
> >http://v2.sdr-radio.com
> >
> >
> >-----Original Message-----
> >From: ccrypti at nym.hush.com [mailto:ccrypti at nym.hush.com]
> >
> >Hi Simon,
> >
> >Thank you for your help. I use the ANT500 antenna which came with
> >the unit. I also noticed that SDR# shows the device as
> >"Jawbreaker"
> >while in my understanding that was a beta prototype. But judging
> >from size, hackrf_info and GQRX it's picked up as HackRF One.
> >
> >I will setup the SDR-Radio software on my laptop and from there i
> >hope we can get something out of it.
> >
> >_______________________________________________
> >HackRF-dev mailing list
> >HackRF-dev at greatscottgadgets.com
> >https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20141030/37546efe/attachment.html>
More information about the HackRF-dev
mailing list