[Hackrf-dev] HackRF-dev Digest, Vol 21, Issue 4

[Gav]

Heyya,

Is there another place I can get that ISO? The link doesn't work now, and
while I think I've got GNU-Radio working under Ubuntu, I'd like to check
against a 'known good reference'.

I've tried the Pentoo distro on a couple of machines, but had the xwindows
problem someone else mentioned.

Cheers,
Gavin Smith


On 5 September 2014 10:22, McDonald, J Douglas <jdmcdona at illinois.edu>
wrote:

> Yes, I see. I got the Ubuntu Gunradio test disk you mentioned working
> and I have figured out how to make ordinary AM and FM radios and they
> work OK. I found the filter setting you mentioned and it works OK.
>
> I now see the problem with SDR#: you can't set that filter to the correct
> value, the writer did not allow a setting for it that I can find.
>
> Thanks very very much
>
> Doug McDonald
> ________________________________________
> From: Michael Ossmann [mike at ossmann.com]
>
> ...
>
> There are several different baseband filter bandwidth settings, however.
> In general you should choose the narrowest one that is suitable for your
> application.  By default, a passband slightly smaller than the digital
> bandwidth is selected.  For details on the baseband filter, see the
> MAX2837 datasheet.
>
> Mike
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> http://nine.pairlist.net/mailman/listinfo/hackrf-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://nine.pairlist.net/pipermail/hackrf-dev/attachments/20140906/a5861bea/attachment.html>