[Hackrf-dev] Internal shielding kit and headers

[C Crane]

Got the header and shield installed. It was an easy job. Thanks for all the
replies.
On Sep 15, 2014 2:16 PM, "Paul Connolly" <eeipcy at gmail.com> wrote:

>  img_0008.jpg @ https://github.com/fd0/hackrf-one-pictures will probably
> show show you exactly what you need to know. Loosen the 3 SMA nuts and then
> pry the case apart on one side with a blade at a guess.
>
>
> On 15/09/2014 13:13, C Crane wrote:
>
> Apologies if this has been asked already but I purchased the internal
> shielding and header jumper kit from nooelectric while waiting for the
> HackRF to arrive. Is this kit still even necessary (shielding parts)? If
> it's worth the effort of installing how does the plastic case come apart?
> Does it snap together or are there screws under the corner feet?
>
>  Thanks,
>
>  Casey
>
>
> _______________________________________________
> HackRF-dev mailing listHackRF-dev at greatscottgadgets.comhttp://nine.pairlist.net/mailman/listinfo/hackrf-dev
>
>
>
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> http://nine.pairlist.net/mailman/listinfo/hackrf-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://nine.pairlist.net/pipermail/hackrf-dev/attachments/20140915/a3979565/attachment.html>