[Hackrf-dev] PyBombs - Updated
Rich Sanders
richnsanders at gmail.com
Fri Sep 19 05:46:10 EDT 2014
No problem. I'm hoping to have a few more fixes to the PyBombs install and
a better explanation of the "env" procedure this weekend.
Rich
On Thu, Sep 18, 2014 at 5:58 PM, Iluta V <iluta2009 at gmail.com> wrote:
> Thank you, Rick,
>
> Your explanation for Pybombs and Gnuradio installation worked like a magic
> for a non IT specialist like myself, and was the best I could find during
> the last 24 hours.
>
> setup_env.sh part was tricky at firslt, though.
>
> Thank you so much!
>
> With my best regards,
>
> Iluta
> iluta.vilcane at securityconcierge.lv
> Security Concierge
> Riga, LATVIA
>
> On Thu, Sep 18, 2014 at 5:54 PM, Rich Sanders <richnsanders at gmail.com>
> wrote:
>
>> Fosphor is supposed to work with AMD and Intel chips too, however, I
>> don't have either graphic card to test with. The gr-fosphor page should
>> shed some light.
>>
>> http://sdr.osmocom.org/trac/wiki/fosphor
>>
>> Rich
>>
>> On Thu, Sep 18, 2014 at 10:48 AM, Bruce Barnett <grymoire at gmail.com>
>> wrote:
>>
>>> So fosphor only works if you have an nVidia graphics card?
>>> p.s. installing nvidia-libopencl1-331-updates and nvidia-opencl-dev
>>> breaks wine AFAICT
>>>
>>> and thanks for the tips...
>>>
>>> On Wed, Sep 17, 2014 at 7:25 PM, Rich Sanders <richnsanders at gmail.com>
>>> wrote:
>>>
>>>> Installing Pybombs
>>>>
>>>> The general disclaimer..This technique/approach has worked for me
>>>> various times, it is the method I prefer, it may not work for you. You
>>>> might prefer other steps. I assume no liability.
>>>>
>>>> HELPFUL/CONSTRUCTIVE criticism is always welcome. Pybombs is not
>>>> perfect, some recipes do not work.
>>>>
>>>> When you see the word user in my instructions, that refers to
>>>> the user name you're using, ie,
>>>>
>>>> run /home/user/pybombs/src/uhd/host/build/utils/uhd_images_downloader.py
>>>>
>>>> and your user is steve, the line becomes
>>>>
>>>> run
>>>> /home/steve/pybombs/src/uhd/host/build/utils/uhd_images_downloader.py
>>>>
>>>> For me, I had issues with the following packages:
>>>>
>>>> gr-rds (solution included)
>>>> wireshark connectors (solution included)
>>>> gr-ieeee802154 (solution included)
>>>> gr-ieee80211 (solution included)
>>>> gqrx (solution included)
>>>> gr-fosphor (solution included)
>>>> Ettus B200/B2100 (solution included)
>>>>
>>>> gr-as (no solution yet), this breaks my gnuradio install , I'll try to
>>>> find a fix in the near future
>>>> gr-extras (no solution yet) this has a pre-requisite of gr-as, which
>>>> breaks my gnuradio install, I'll try to find a fix in the near future
>>>> pocsag-mpt (no solution yet) this has a pre-requisite of gr-as, which
>>>> breaks my gnuradio install, I'll try to find a fix in the near future
>>>> gr-smartnet (no solution yet), I don't think this is maintained any more
>>>> gr-bluetooth (no solution yet), I don't think this is maintained any
>>>> more
>>>> openlte (no solution yet)
>>>> niusprio (no solution yet)
>>>>
>>>> I always start with a fresh Ubuntu load, this one is based on Ubuntu
>>>> 14.04
>>>>
>>>> After install, perform the typical:
>>>>
>>>> apt-get update
>>>> apt-get dist-upgrade
>>>>
>>>> Pybombs will by default try to install all dependencies, but I have
>>>> found the install goes much smoother if I install some packages in advance:
>>>>
>>>> type sudo apt-get -y install git-core cmake g++ python-dev swig
>>>> pkg-config libfftw3-dev libcppunit-dev libgsl0-dev libusb-dev libsdl1.2-dev
>>>> python-wxgtk2.8 python-numpy python-cheetah python-lxml doxygen libxi-dev
>>>> python-sip libqt4-opengl-dev libqwt-dev libfontconfig1-dev libxrender-dev
>>>> python-qwt5-qt4 python-sip python-sip-dev cmake xorg-dev libglu1-mesa-dev
>>>> python-zmq pypy-zmq
>>>>
>>>> reboot Ubuntu
>>>>
>>>> terminal into your home directory
>>>>
>>>> type git clone git://github.com/pybombs/pybombs
>>>> type cd pybombs
>>>> type ./pybombs config
>>>>
>>>> In the configuration setup you can press enter for every option, I
>>>> changed the install prefix location because this helps prevent errors when
>>>> I manually install non pybombs packages later on, if you are only going to
>>>> use pybombs “recipes” leave the default location. If you change to
>>>> "/usr/local" you'll have to run "sudo ./pybombs config" after the config
>>>> files run
>>>>
>>>> type sudo ./pybombs config
>>>>
>>>> Output of ./pybombs config
>>>>
>>>> Initializing config file...
>>>> Username for GIT access
>>>> gituser [user]:
>>>> Install Prefix prefix [/home/user/target]:/usr/local/
>>>> Order in which to attempt installations when available, options are:
>>>> src, rpm, deb satisfy_order [deb,src]:
>>>> Comma seperated list of package names to assume are already installed
>>>> forcepkgs []:
>>>> Time the monitor thread waits (in seconds) before retrying downloads
>>>> timeout [30]:
>>>> CMAKE_BUILD_TYPE args to pass to cmake projects, options are: Debug,
>>>> Release, RelWithDebInfo, MinSizeRel, cmakebuildtype [RelWithDebInfo]:
>>>> Build doxygen while compiling packages? options are: ON, OFF builddocs
>>>> [OFF]:
>>>> C Compiler Executable [gcc, clang, icc, etc] cc [gcc]:
>>>> C++ Compiler Executable [g++, clang++, icpc, etc] cxx [g++]:
>>>> Concurrent make threads [1,2,4,8...] makewidth [4]:
>>>> done
>>>> Settled on prefix: /usr/local
>>>>
>>>> [Errno 13] Permission denied: '/usr/local/lib64'
>>>> Error! Configured install prefix requires root privileges. Please
>>>> re-run as sudo!
>>>>
>>>> This error is normal if you ran sudo ./pybombs config, rerun the config
>>>> typing sudo ./pybombs config
>>>>
>>>> Output of ./pybombs config
>>>>
>>>> Settled on prefix: /usr/local
>>>> Initializing environmental variables...
>>>>
>>>> /usr/local//python/:/usr/local//lib/python2.6/site-packages/:/usr/local//lib64/python2.6/site-packages/:/usr/local//lib/python2.6/dist-packages/:/usr/local//lib64/python2.6/dist-packages/:/usr/local//lib/python2.7/site-packages/:/usr/local//lib64/python2.7/site-packages/:/usr/local//lib/python2.7/dist-packages/:/usr/local//lib64/python2.7/dist-packages/:/usr/local//python/:/usr/local//lib/python2.6/site-packages/:/usr/local//lib64/python2.6/site-packages/:/usr/local//lib/python2.6/dist-packages/:/usr/local//lib64/python2.6/dist-packages/:/usr/local//lib/python2.7/site-packages/:/usr/local//lib64/python2.7/site-packages/:/usr/local//lib/python2.7/dist-packages/:/usr/local//lib64/python2.7/dist-packages/
>>>> no existing inventory found, creating an empty one...
>>>> ---------- loading recipes -------------------
>>>> Loading recipes ...
>>>> Loading recipes ... done
>>>> ---------- loading recipes finished ----------
>>>>
>>>> gituser = user
>>>> prefix = /usr/local/
>>>> satisfy_order = deb,src
>>>> forcepkgs =
>>>> timeout = 30
>>>> cmakebuildtype = RelWithDebInfo
>>>> builddocs = OFF
>>>> cc = gcc
>>>> cxx = g++
>>>> makewidth = 4
>>>>
>>>> from this point forward, you only need "sudo" if you installed into a
>>>> custom directory instead of the default /home/user/target
>>>>
>>>> type sudo ./pybombs install gnuradio
>>>>
>>>> THIS WILL TAKE A WHILE
>>>>
>>>> When it is done type sudo ./app_store.py
>>>>
>>>> Click on the packages you want to install, you can only install one at
>>>> a time. The app_store may go dark. You can monitor the progress in the
>>>> terminal window that you launched app_store in. If everything installs
>>>> correctly, the app_store will brighten and your terminal window will
>>>> display "installation ok via: src" if it errored out, the app_store will
>>>> close and your terminal window will have some information.
>>>>
>>>> I suggest starting with gr-osmosdr (<--- this will install many of your
>>>> app_store blocks such as hackrf and osmosdr) and gr-pyqt
>>>>
>>>> Click the "X" to exit the app_store.
>>>>
>>>> type sudo ./pybombs env
>>>>
>>>> Using the Ubuntu file manager, navigate to the location listed after
>>>> running ./pybombs env. Open setup_env.sh and copy everything below the
>>>> following line:
>>>>
>>>> # WARNING: This file is auto-generated by pybombs, any manual changes
>>>> to it may be overwritten!
>>>>
>>>> It should look similar to:
>>>>
>>>> export
>>>> PATH="/usr/local//bin/:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/lib64/qt4/bin/"
>>>> export
>>>> PYTHONPATH="/usr/local//python/:/usr/local//lib/python2.6/site-packages/:/usr/local//lib64/python2.6/site-packages/:/usr/local//lib/python2.6/dist-packages/:/usr/local//lib64/python2.6/dist-packages/:/usr/local//lib/python2.7/site-packages/:/usr/local//lib64/python2.7/site-packages/:/usr/local//lib/python2.7/dist-packages/:/usr/local//lib64/python2.7/dist-packages/:/usr/local//python/:/usr/local//lib/python2.6/site-packages/:/usr/local//lib64/python2.6/site-packages/:/usr/local//lib/python2.6/dist-packages/:/usr/local//lib64/python2.6/dist-packages/:/usr/local//lib/python2.7/site-packages/:/usr/local//lib64/python2.7/site-packages/:/usr/local//lib/python2.7/dist-packages/:/usr/local//lib64/python2.7/dist-packages/"
>>>> export LD_LIBRARY_PATH="/usr/local//lib/:/usr/local//lib64/:"
>>>> export
>>>> PKG_CONFIG_PATH="/usr/local//lib/pkgconfig/:/usr/local//lib64/pkgconfig/:"
>>>>
>>>> In the termianl window, CD to your home directory
>>>>
>>>> type sudo nano .bashrc
>>>>
>>>> scroll to the bottom and paste the copied lines, then Ctrl X, Yes, Enter
>>>>
>>>> You should generate the env file and check your .bashrc to see if you
>>>> need to update the file after installing new recipes
>>>>
>>>> ------------------------------
>>>>
>>>> Updating libhackrf
>>>>
>>>> type git clone https://github.com/mossmann/hackrf.git
>>>> type cd hackrf/host/libhackrf/
>>>> type mkdir build
>>>> type cd build
>>>> type cmake ..
>>>> type make
>>>> type sudo make install
>>>> type sudo ldconfig
>>>> copy /home/hackrf/host/libhackrf/53-hackrf.rules to /etc/udev/rules.d
>>>> type sudo udevadm control --reload-rules
>>>> reboot
>>>> type hackrf_info
>>>>
>>>> You should see something SIMILAR to:
>>>>
>>>> Found HackRF board.
>>>> Board ID Number: 2 (HackRF One)
>>>> Firmware Version: git-44df9d1
>>>> Part ID Number: 0xa000cb3c 0x004d4f3f
>>>> Serial Number: 0x00000000 0x00000000 0x457863c8 0x2f1b511f
>>>>
>>>> type gnuradio-companion to run gnuradio
>>>>
>>>> You should be good to go!
>>>>
>>>> If you need to update the firmware, follow Mike's directions at:
>>>>
>>>> https://github.com/mossmann/hackrf/wiki/Updating-Firmware
>>>>
>>>> -------------------
>>>>
>>>> Ettus B200
>>>> run /home/user/pybombs/src/uhd/host/build/utils/uhd_images_downloader.py
>>>> copy the rules from /usr/local/lib/uhd/utils to /etc/udev/rules.d
>>>> type sudo udevadm control --reload-rules
>>>> reboot
>>>> -----------------------------------------------
>>>> Gqrx
>>>> Edit the gqrx.lwr file and remove only the BOOST_SUFFIX=-mt from the
>>>> qmake line
>>>> If you've already tried to install, remove by typing sudo
>>>> ./pybombs clean gqrx
>>>> Re-install by clicking gqrx button
>>>> ------------------------------------------------
>>>> gr-rds
>>>>
>>>> type sudo apt-get install libxml2 cmake libboost-all-dev
>>>> libcppunit-dev liblog4cpp5-dev swig
>>>> cd to your home directory
>>>> type git clone https://github.com/bastibl/gr-rds
>>>> type cd gr-rds
>>>> type mkdir build
>>>> type cd build
>>>> type cmake ..
>>>> type make
>>>> type sudo make install
>>>> type sudo ldconfig
>>>> --------------------------------------
>>>> Wireshark connectors
>>>>
>>>> cd to your home directory
>>>>
>>>> type git clone https://github.com/bastibl/gr-foo.git
>>>> type cd gr-foo
>>>> type mkdir build
>>>> type cd build
>>>> type cmake ..
>>>> type make
>>>> type sudo make install
>>>> type sudo ldconfig
>>>> -----------------------------
>>>> gr-ieee802-15-4
>>>>
>>>> cd to your home directory
>>>>
>>>> type git clone git://github.com/bastibl/gr-ieee802-15-4.git
>>>> type cd gr-ieee802-15-4
>>>> type mkdir build
>>>> type cd build
>>>> type cmake ..
>>>> type make
>>>> type sudo make install
>>>> type sudo ldconfig
>>>>
>>>> The hierarchical block has to be installed separately:
>>>> Open examples/ieee802_15_4_PHY.grc in gnuradio-companion and generate
>>>> the flow graph. This installs the hierarchical block in your home, where
>>>> gnuradio-companion can find it (typically ~/.grc_gnuradio).
>>>>
>>>> -----------------
>>>> gr-ieee802-11
>>>>
>>>> type sudo apt-get install liblog4cpp5-dev libitpp-dev
>>>> cd to your home directory
>>>> type git clone git://github.com/bastibl/gr-ieee802-11.git
>>>> type cd gr-ieee802-11
>>>> type mkdir build
>>>> type cd build
>>>> type cmake ..
>>>> type make
>>>> type sudo make install
>>>> type sudo ldconfig
>>>>
>>>> The physical layer is encapsulated in a hierarchical block to allow for
>>>> a clearer transceiver structure in GNU Radio Companion. This hierarchical
>>>> block is not included in the installation process. You have to open
>>>> /examples/wifi_phy_hier.grc with GNU Radio Companion and build it. This
>>>> will install the block in ~/.grc_gnuradio/.
>>>> -----------
>>>>
>>>> gr-fosphor
>>>>
>>>> type sudo apt-get install opencl-headers
>>>> type sudo ./app_store
>>>> click the fosphor button
>>>>
>>>> Then edit:
>>>> File /usr/local/lib/python2.7/dist-packages/gnuradio/fosphor/__init__.py
>>>>
>>>> below this line:
>>>> from fosphor_swig import *
>>>>
>>>> type import sys
>>>> save the file
>>>>
>>>> Because of dependency issues, do these seperately, in this order
>>>> type sudo apt-get install nvidia-libopencl1-331-updates
>>>> type sudo apt-get install nvidia-opencl-dev
>>>>
>>>> reboot
>>>>
>>>> Type sudu apt-get install pyopengl (freeglut3 will be installed
>>>> too)
>>>>
>>>> If you try to run fosphor and get an error about
>>>> glsl 1.5 not supported in Ubuntu, go to the "additional drivers" at
>>>> load the Nvidia drivers.
>>>>
>>>> Posted on my site:
>>>> http://www.celestialphotographer.com/2014/09/17/pybombs-gnuradio/
>>>>
>>>> _______________________________________________
>>>> HackRF-dev mailing list
>>>> HackRF-dev at greatscottgadgets.com
>>>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>>>>
>>>>
>>>
>>
>> _______________________________________________
>> HackRF-dev mailing list
>> HackRF-dev at greatscottgadgets.com
>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20140919/fcd4b4af/attachment.html>
More information about the HackRF-dev
mailing list