[Hackrf-dev] Help: HackRF Not Found

[hackrf hackrf]

# At boot the following leds are lit:
# 3V3 USB RX TX (USB/RX and TX are dimly lit)

# At dfu boot the following leds are lit:
# 3V3 USB RX TX (USB/RX and TX are dimly lit)

# At dfu flash the following leds are lit:
# 3V3 1V8 RF USB

# At reset the following leds are lit:
# 3V3 RF, USB and TX are somewhat lit and TX is dimly lit

So yes, there is a change in leds on a power cyclue and after a reset.
I'm using a HackRF One.

On Wed, Sep 24, 2014 at 4:23 PM, Michael Ossmann <mike at ossmann.com> wrote:

> On Wed, Sep 24, 2014 at 09:56:48AM +0200, hackrf hackrf wrote:
> >
> > I can boot the device in DFU and flash it again. But after every power
> > cycle, it returns dead.
> >
> > See the following pastbin for more information.
> > http://pastebin.com/PdY416ke
>
> Thanks for the details.  Are you using a HackRF One (not a Jawbreaker)?
> What do the LEDs do if you press the reset button after hackrf_spiflash?
> Do they behave differently after a power cycle?
>
> Have you tried flashing the 2014.04.1 firmware?  (I don't normally
> recommend downgrading firmware, but it would be interesting to see if it
> boots and appears on USB.)
>
> Mike
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20140924/45c9064b/attachment.html>