[Hackrf-dev] HackRF-dev Digest, Vol 33, Issue 5
Dana Shtun
ve3dss at hotmail.com
Sat Aug 8 07:25:18 EDT 2015
Max distance here @ 1296 Mhz is 23 miles using CW (morse code).
Dana in Toronto
> From: hackrf-dev-request at greatscottgadgets.com
> Subject: HackRF-dev Digest, Vol 33, Issue 5
> To: hackrf-dev at greatscottgadgets.com
> Date: Sat, 8 Aug 2015 01:30:23 -0400
>
> Send HackRF-dev mailing list submissions to
> hackrf-dev at greatscottgadgets.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> or, via email, send a message with subject or body 'help' to
> hackrf-dev-request at greatscottgadgets.com
>
> You can reach the person managing the list at
> hackrf-dev-owner at greatscottgadgets.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of HackRF-dev digest..."
>
>
> Today's Topics:
>
> 1. Re: HackRF-dev Digest, Vol 33, Issue 4 (SARRA KTITI)
> 2. Re: HackRF-dev Digest, Vol 33, Issue 4 (Mitja kocjan?i?)
> 3. Com/Serial Port Access to HackRF (Non Yeah)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 7 Aug 2015 11:20:37 +0200
> From: SARRA KTITI <sarraktiti at gmail.com>
> To: "hackrf-dev at greatscottgadgets.com"
> <hackrf-dev at greatscottgadgets.com>
> Subject: Re: [Hackrf-dev] HackRF-dev Digest, Vol 33, Issue 4
> Message-ID:
> <CAJZUweFGbbjWF2mW8Q=TFK4YHvUZrN=ZfRTVNri_29uaR4gpmg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Thanks Paul i will try this solution too ,
>
> One more question please ,can someone tell me about the maximum
> transmission distance of HackRF device .
>
> Bests,
> Sarra Ktiti
>
> 2015-08-06 7:30 GMT+02:00 <hackrf-dev-request at greatscottgadgets.com>:
>
> > Send HackRF-dev mailing list submissions to
> > hackrf-dev at greatscottgadgets.com
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> > or, via email, send a message with subject or body 'help' to
> > hackrf-dev-request at greatscottgadgets.com
> >
> > You can reach the person managing the list at
> > hackrf-dev-owner at greatscottgadgets.com
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of HackRF-dev digest..."
> >
> >
> > Today's Topics:
> >
> > 1. feasible idea using HackRF One (SARRA KTITI)
> > 2. Re: feasible idea using HackRF One (Carl Olsson)
> > 3. Re: feasible idea using HackRF One (SARRA KTITI)
> > 4. Re: feasible idea using HackRF One (Carl Olsson)
> > 5. Re: feasible idea using HackRF One (SARRA KTITI)
> > 6. Re: feasible idea using HackRF One (Carl Olsson)
> > 7. Re: feasible idea using HackRF One (Martin Holst Swende)
> > 8. Re: feasible idea using HackRF One (Paul Connolly)
> > 9. Re: feasible idea using HackRF One (SARRA KTITI)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Wed, 5 Aug 2015 17:21:42 +0200
> > From: SARRA KTITI <sarraktiti at gmail.com>
> > To: hackrf-dev at greatscottgadgets.com
> > Subject: [Hackrf-dev] feasible idea using HackRF One
> > Message-ID:
> > <
> > CAJZUweFv472sxhsNkrTBnrgQ16VAbig7ic+FTHentp5eGGUQYw at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Hi,
> >
> > I just got my HackRF One and i am trying to discover what can do with it.
> >
> > My question is :
> >
> > >From my understanding HackRF One use software to build radio system and
> > utilise the radio spectrum instead in working on Hardware . So can i build
> > a platform that use HackRF One to send and receive text message ? Is the
> > idea feasible?
> >
> > Sarah Ktiti,
> >
> > Bests,
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> > https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/ba022784/attachment-0001.html
> > >
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Wed, 5 Aug 2015 17:48:40 +0200
> > From: Carl Olsson <carlolsson.co at gmail.com>
> > To: SARRA KTITI <sarraktiti at gmail.com>
> > Cc: "hackrf-dev at greatscottgadgets.com"
> > <hackrf-dev at greatscottgadgets.com>
> > Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> > Message-ID: <C8B3C864-EDDF-447D-8A3C-9945DAE741F9 at gmail.com>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > Hi,
> >
> > Yes it is very feasible to build a transmitter and receiver for text
> > messages. You would have to decide on how to encode the text, which
> > modulation to use etc.
> >
> > Best,
> > Carl
> >
> > > 5 aug 2015 kl. 17:21 skrev SARRA KTITI <sarraktiti at gmail.com>:
> > >
> > > Hi,
> > > I just got my HackRF One and i am trying to discover what can do with it.
> > > My question is :
> > > From my understanding HackRF One use software to build radio system and
> > utilise the radio spectrum instead in working on Hardware . So can i build
> > a platform that use HackRF One to send and receive text message ? Is the
> > idea feasible?
> > >
> > > Sarah Ktiti,
> > > Bests,
> > >
> > >
> > > _______________________________________________
> > > HackRF-dev mailing list
> > > HackRF-dev at greatscottgadgets.com
> > > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> > https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/5d172910/attachment-0001.html
> > >
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Wed, 5 Aug 2015 18:06:47 +0200
> > From: SARRA KTITI <sarraktiti at gmail.com>
> > To: Carl Olsson <carlolsson.co at gmail.com>
> > Cc: "hackrf-dev at greatscottgadgets.com"
> > <hackrf-dev at greatscottgadgets.com>
> > Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> > Message-ID:
> > <
> > CAJZUweFp7COYGSMBhCvhUobZEWrOKOwJQmWkABy6FzsXFVgKjA at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Thanks Carl,
> > This is the first time that i use HackRF so , sorry if my question seems to
> > be so basic.
> > Should i use matlab or another tool in addition to gnuradio companion to
> > develop this idea?
> > Could someone please give me a hint on how to proceed?
> >
> > 2015-08-05 17:48 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> >
> > > Hi,
> > >
> > > Yes it is very feasible to build a transmitter and receiver for text
> > > messages. You would have to decide on how to encode the text, which
> > > modulation to use etc.
> > >
> > > Best,
> > > Carl
> > >
> > > 5 aug 2015 kl. 17:21 skrev SARRA KTITI <sarraktiti at gmail.com>:
> > >
> > > Hi,
> > >
> > > I just got my HackRF One and i am trying to discover what can do with it.
> > >
> > > My question is :
> > >
> > > From my understanding HackRF One use software to build radio system and
> > > utilise the radio spectrum instead in working on Hardware . So can i
> > build
> > > a platform that use HackRF One to send and receive text message ? Is the
> > > idea feasible?
> > >
> > > Sarah Ktiti,
> > >
> > > Bests,
> > >
> > >
> > >
> > > _______________________________________________
> > > HackRF-dev mailing list
> > > HackRF-dev at greatscottgadgets.com
> > > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> > >
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> > https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/cfde009a/attachment-0001.html
> > >
> >
> > ------------------------------
> >
> > Message: 4
> > Date: Wed, 5 Aug 2015 18:25:31 +0200
> > From: Carl Olsson <carlolsson.co at gmail.com>
> > To: SARRA KTITI <sarraktiti at gmail.com>
> > Cc: "hackrf-dev at greatscottgadgets.com"
> > <hackrf-dev at greatscottgadgets.com>
> > Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> > Message-ID: <66701B53-9FD4-4879-A3B4-57AA11DF05C6 at gmail.com>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > Np, however when reading your question again maybe I misunderstood you.
> > Did you mean to send and receive text messages as in SMS?
> >
> > If that is not what you want to do but instead build a data link for any
> > text message between e.g. two hackrf I would start with gnuradio companion.
> > You don't need matlab or any other tool for that.
> >
> > Best
> >
> >
> > > 5 aug 2015 kl. 18:06 skrev SARRA KTITI <sarraktiti at gmail.com>:
> > >
> > > Thanks Carl,
> > > This is the first time that i use HackRF so , sorry if my question seems
> > to be so basic.
> > > Should i use matlab or another tool in addition to gnuradio companion
> > to develop this idea?
> > > Could someone please give me a hint on how to proceed?
> > >
> > > 2015-08-05 17:48 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> > >> Hi,
> > >>
> > >> Yes it is very feasible to build a transmitter and receiver for text
> > messages. You would have to decide on how to encode the text, which
> > modulation to use etc.
> > >>
> > >> Best,
> > >> Carl
> > >>
> > >>> 5 aug 2015 kl. 17:21 skrev SARRA KTITI <sarraktiti at gmail.com>:
> > >>>
> > >>> Hi,
> > >>> I just got my HackRF One and i am trying to discover what can do with
> > it.
> > >>> My question is :
> > >>> From my understanding HackRF One use software to build radio system
> > and utilise the radio spectrum instead in working on Hardware . So can i
> > build a platform that use HackRF One to send and receive text message ? Is
> > the idea feasible?
> > >>>
> > >>> Sarah Ktiti,
> > >>> Bests,
> > >>>
> > >>>
> > >>> _______________________________________________
> > >>> HackRF-dev mailing list
> > >>> HackRF-dev at greatscottgadgets.com
> > >>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> > https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/72322a0b/attachment-0001.html
> > >
> >
> > ------------------------------
> >
> > Message: 5
> > Date: Wed, 5 Aug 2015 18:39:08 +0200
> > From: SARRA KTITI <sarraktiti at gmail.com>
> > To: Carl Olsson <carlolsson.co at gmail.com>
> > Cc: "hackrf-dev at greatscottgadgets.com"
> > <hackrf-dev at greatscottgadgets.com>
> > Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> > Message-ID:
> > <CAJZUweExPwC=
> > fU30gX1uMbpJMhcRdEPXqqSBKBbSX5u9sjLZ1w at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Thanks for your quick reply Carl ,
> >
> > yes that?s what i meant , to send and receive text messages as in
> > SMS.Still the idea feasible ?
> >
> > Bests,
> > sarra
> >
> > 2015-08-05 18:25 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> >
> > > Np, however when reading your question again maybe I misunderstood you.
> > > Did you mean to send and receive text messages as in SMS?
> > >
> > > If that is not what you want to do but instead build a data link for any
> > > text message between e.g. two hackrf I would start with gnuradio
> > companion.
> > > You don't need matlab or any other tool for that.
> > >
> > > Best
> > >
> > >
> > > 5 aug 2015 kl. 18:06 skrev SARRA KTITI <sarraktiti at gmail.com>:
> > >
> > > Thanks Carl,
> > > This is the first time that i use HackRF so , sorry if my question seems
> > > to be so basic.
> > > Should i use matlab or another tool in addition to gnuradio companion
> > to
> > > develop this idea?
> > > Could someone please give me a hint on how to proceed?
> > >
> > > 2015-08-05 17:48 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> > >
> > >> Hi,
> > >>
> > >> Yes it is very feasible to build a transmitter and receiver for text
> > >> messages. You would have to decide on how to encode the text, which
> > >> modulation to use etc.
> > >>
> > >> Best,
> > >> Carl
> > >>
> > >> 5 aug 2015 kl. 17:21 skrev SARRA KTITI <sarraktiti at gmail.com>:
> > >>
> > >> Hi,
> > >>
> > >> I just got my HackRF One and i am trying to discover what can do with
> > it.
> > >>
> > >> My question is :
> > >>
> > >> From my understanding HackRF One use software to build radio system and
> > >> utilise the radio spectrum instead in working on Hardware . So can i
> > build
> > >> a platform that use HackRF One to send and receive text message ? Is the
> > >> idea feasible?
> > >>
> > >> Sarah Ktiti,
> > >>
> > >> Bests,
> > >>
> > >>
> > >>
> > >> _______________________________________________
> > >> HackRF-dev mailing list
> > >> HackRF-dev at greatscottgadgets.com
> > >> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> > >>
> > >>
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> > https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/40ce5eb0/attachment-0001.html
> > >
> >
> > ------------------------------
> >
> > Message: 6
> > Date: Wed, 5 Aug 2015 19:36:13 +0200
> > From: Carl Olsson <carlolsson.co at gmail.com>
> > To: SARRA KTITI <sarraktiti at gmail.com>
> > Cc: "hackrf-dev at greatscottgadgets.com"
> > <hackrf-dev at greatscottgadgets.com>
> > Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> > Message-ID: <E1E82893-2B31-432A-9604-B3F0B9B8581E at gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Ok, then I am afraid someone else more experienced will have to answer.
> > You can look into openBTS, it's for the base station but maybe you will
> > find useful information there.
> >
> > Good luck!
> >
> >
> >
> > > 5 aug 2015 kl. 18:39 skrev SARRA KTITI <sarraktiti at gmail.com>:
> > >
> > > Thanks for your quick reply Carl ,
> > >
> > > yes that?s what i meant , to send and receive text messages as in
> > SMS.Still the idea feasible ?
> > >
> > > Bests,
> > > sarra
> > >
> > > 2015-08-05 18:25 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> > >> Np, however when reading your question again maybe I misunderstood you.
> > >> Did you mean to send and receive text messages as in SMS?
> > >>
> > >> If that is not what you want to do but instead build a data link for
> > any text message between e.g. two hackrf I would start with gnuradio
> > companion. You don't need matlab or any other tool for that.
> > >>
> > >> Best
> > >>
> > >>
> > >>> 5 aug 2015 kl. 18:06 skrev SARRA KTITI <sarraktiti at gmail.com>:
> > >>>
> > >>> Thanks Carl,
> > >>> This is the first time that i use HackRF so , sorry if my question
> > seems to be so basic.
> > >>> Should i use matlab or another tool in addition to gnuradio
> > companion to develop this idea?
> > >>> Could someone please give me a hint on how to proceed?
> > >>>
> > >>> 2015-08-05 17:48 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> > >>>> Hi,
> > >>>>
> > >>>> Yes it is very feasible to build a transmitter and receiver for text
> > messages. You would have to decide on how to encode the text, which
> > modulation to use etc.
> > >>>>
> > >>>> Best,
> > >>>> Carl
> > >>>>
> > >>>>> 5 aug 2015 kl. 17:21 skrev SARRA KTITI <sarraktiti at gmail.com>:
> > >>>>>
> > >>>>> Hi,
> > >>>>> I just got my HackRF One and i am trying to discover what can do
> > with it.
> > >>>>> My question is :
> > >>>>> From my understanding HackRF One use software to build radio system
> > and utilise the radio spectrum instead in working on Hardware . So can i
> > build a platform that use HackRF One to send and receive text message ? Is
> > the idea feasible?
> > >>>>>
> > >>>>> Sarah Ktiti,
> > >>>>> Bests,
> > >>>>>
> > >>>>>
> > >>>>> _______________________________________________
> > >>>>> HackRF-dev mailing list
> > >>>>> HackRF-dev at greatscottgadgets.com
> > >>>>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> > https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/e66e8c42/attachment-0001.html
> > >
> >
> > ------------------------------
> >
> > Message: 7
> > Date: Wed, 05 Aug 2015 20:43:41 +0200
> > From: Martin Holst Swende <martin at swende.se>
> > To: Carl Olsson <carlolsson.co at gmail.com>, SARRA KTITI
> > <sarraktiti at gmail.com>
> > Cc: "hackrf-dev at greatscottgadgets.com"
> > <hackrf-dev at greatscottgadgets.com>
> > Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> > Message-ID: <55C2595D.6050506 at swende.se>
> > Content-Type: text/plain; charset=windows-1252
> >
> > I think the idea is feasible, but it's definitely not a simple project.
> >
> > I can recommend reading through the blog posts starting with this one;
> > http://domonkos.tomcsanyi.net/?p=418 . It's related to GSM over SDR, not
> > specifically regarding SMS.
> >
> > The blog posts above might be a good place to start, anyway.
> > Cheers,
> > Martin
> >
> > On 2015-08-05 19:36, Carl Olsson wrote:
> > > Ok, then I am afraid someone else more experienced will have to answer.
> > > You can look into openBTS, it's for the base station but maybe you will
> > > find useful information there.
> > >
> > > Good luck!
> > >
> > >
> > >
> > > 5 aug 2015 kl. 18:39 skrev SARRA KTITI <sarraktiti at gmail.com
> > > <mailto:sarraktiti at gmail.com>>:
> > >
> > >> Thanks for your quick reply Carl ,
> > >>
> > >> yes that?s what i meant , to send and receive text messages as in
> > >> SMS.Still the idea feasible ?
> > >>
> > >> Bests,
> > >> sarra
> > >>
> > >> 2015-08-05 18:25 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com
> > >> <mailto:carlolsson.co at gmail.com>>:
> > >>
> > >> Np, however when reading your question again maybe I misunderstood
> > >> you.
> > >> Did you mean to send and receive text messages as in SMS?
> > >>
> > >> If that is not what you want to do but instead build a data link
> > >> for any text message between e.g. two hackrf I would start with
> > >> gnuradio companion. You don't need matlab or any other tool for
> > that.
> > >>
> > >> Best
> > >>
> > >>
> > >> 5 aug 2015 kl. 18:06 skrev SARRA KTITI <sarraktiti at gmail.com
> > >> <mailto:sarraktiti at gmail.com>>:
> > >>
> > >>> Thanks Carl,
> > >>> This is the first time that i use HackRF so , sorry if my
> > >>> question seems to be so basic.
> > >>> Should i use matlab or another tool in addition to gnuradio
> > >>> companion to develop this idea?
> > >>> Could someone please give me a hint on how to proceed?
> > >>>
> > >>> 2015-08-05 17:48 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com
> > >>> <mailto:carlolsson.co at gmail.com>>:
> > >>>
> > >>> Hi,
> > >>>
> > >>> Yes it is very feasible to build a transmitter and receiver
> > >>> for text messages. You would have to decide on how to encode
> > >>> the text, which modulation to use etc.
> > >>>
> > >>> Best,
> > >>> Carl
> > >>>
> > >>> 5 aug 2015 kl. 17:21 skrev SARRA KTITI <sarraktiti at gmail.com
> > >>> <mailto:sarraktiti at gmail.com>>:
> > >>>
> > >>>> Hi,
> > >>>>
> > >>>> I just got my HackRF One and i am trying to discover what
> > >>>> can do with it.
> > >>>>
> > >>>> My question is :
> > >>>>
> > >>>> From my understanding HackRF One use software to build radio
> > >>>> system and utilise the radio spectrum instead in working on
> > >>>> Hardware . So can i build a platform that use HackRF One to
> > >>>> send and receive text message ? Is the idea feasible?
> > >>>>
> > >>>> Sarah Ktiti,
> > >>>>
> > >>>> Bests,
> > >>>>
> > >>>>
> > >>>>
> > >>>> _______________________________________________
> > >>>> HackRF-dev mailing list
> > >>>> HackRF-dev at greatscottgadgets.com
> > >>>> <mailto:HackRF-dev at greatscottgadgets.com>
> > >>>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> > >>>
> > >>>
> > >>
> > >
> > >
> > > _______________________________________________
> > > HackRF-dev mailing list
> > > HackRF-dev at greatscottgadgets.com
> > > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> > >
> >
> >
> >
> > ------------------------------
> >
> > Message: 8
> > Date: Wed, 5 Aug 2015 20:22:29 +0100
> > From: Paul Connolly <eeipcy at gmail.com>
> > To: hackrf-dev at greatscottgadgets.com
> > Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> > Message-ID: <55C26275.4090105 at gmail.com>
> > Content-Type: text/plain; charset="windows-1252"
> >
> > I'd go the path of least resistance (cost and time) and buy a SIM card
> > from a telco and use one of these:
> > https://www.adafruit.com/products/1946
> >
> > http://www.aliexpress.com/item/Free-Shipping-Original-SIM800H-SIMCOM-GSM-GPRS-Quad-Band-LGA-power-consumption-is-very-low-We/1351765072.html
> >
> > On 05/08/2015 17:39, SARRA KTITI wrote:
> > > Thanks for your quick reply Carl ,
> > >
> > > yes that?s what i meant , to send and receive text messages as in
> > > SMS.Still the idea feasible ?
> > >
> > > Bests,
> > > sarra
> > >
> > > 2015-08-05 18:25 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> > >
> > >> Np, however when reading your question again maybe I misunderstood you.
> > >> Did you mean to send and receive text messages as in SMS?
> > >>
> > >> If that is not what you want to do but instead build a data link for any
> > >> text message between e.g. two hackrf I would start with gnuradio
> > companion.
> > >> You don't need matlab or any other tool for that.
> > >>
> > >> Best
> > >>
> > >>
> > >> 5 aug 2015 kl. 18:06 skrev SARRA KTITI <sarraktiti at gmail.com>:
> > >>
> > >> Thanks Carl,
> > >> This is the first time that i use HackRF so , sorry if my question seems
> > >> to be so basic.
> > >> Should i use matlab or another tool in addition to gnuradio companion
> > to
> > >> develop this idea?
> > >> Could someone please give me a hint on how to proceed?
> > >>
> > >> 2015-08-05 17:48 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> > >>
> > >>> Hi,
> > >>>
> > >>> Yes it is very feasible to build a transmitter and receiver for text
> > >>> messages. You would have to decide on how to encode the text, which
> > >>> modulation to use etc.
> > >>>
> > >>> Best,
> > >>> Carl
> > >>>
> > >>> 5 aug 2015 kl. 17:21 skrev SARRA KTITI <sarraktiti at gmail.com>:
> > >>>
> > >>> Hi,
> > >>>
> > >>> I just got my HackRF One and i am trying to discover what can do with
> > it.
> > >>>
> > >>> My question is :
> > >>>
> > >>> From my understanding HackRF One use software to build radio system and
> > >>> utilise the radio spectrum instead in working on Hardware . So can i
> > build
> > >>> a platform that use HackRF One to send and receive text message ? Is
> > the
> > >>> idea feasible?
> > >>>
> > >>> Sarah Ktiti,
> > >>>
> > >>> Bests,
> > >>>
> > >>>
> > >>>
> > >>> _______________________________________________
> > >>> HackRF-dev mailing list
> > >>> HackRF-dev at greatscottgadgets.com
> > >>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> > >>>
> > >>>
> > >
> > >
> > > _______________________________________________
> > > HackRF-dev mailing list
> > > HackRF-dev at greatscottgadgets.com
> > > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> > https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/97c7a904/attachment-0001.html
> > >
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: signature.asc
> > Type: application/pgp-signature
> > Size: 834 bytes
> > Desc: OpenPGP digital signature
> > URL: <
> > https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/97c7a904/attachment-0001.pgp
> > >
> >
> > ------------------------------
> >
> > Message: 9
> > Date: Thu, 6 Aug 2015 00:29:59 +0200
> > From: SARRA KTITI <sarraktiti at gmail.com>
> > To: Martin Holst Swende <martin at swende.se>
> > Cc: Carl Olsson <carlolsson.co at gmail.com>,
> > "hackrf-dev at greatscottgadgets.com" <
> > hackrf-dev at greatscottgadgets.com>
> > Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> > Message-ID:
> > <CAJZUweFrd5+hM=73LWLyGnR_ov5=
> > yiQdSqpoLfNYZDKuwp1NQw at mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Thanks alot for your response Martin.
> >
> > 2015-08-05 20:43 GMT+02:00 Martin Holst Swende <martin at swende.se>:
> >
> > > I think the idea is feasible, but it's definitely not a simple project.
> > >
> > > I can recommend reading through the blog posts starting with this one;
> > > http://domonkos.tomcsanyi.net/?p=418 . It's related to GSM over SDR, not
> > > specifically regarding SMS.
> > >
> > > The blog posts above might be a good place to start, anyway.
> > > Cheers,
> > > Martin
> > >
> > > On 2015-08-05 19:36, Carl Olsson wrote:
> > > > Ok, then I am afraid someone else more experienced will have to answer.
> > > > You can look into openBTS, it's for the base station but maybe you will
> > > > find useful information there.
> > > >
> > > > Good luck!
> > > >
> > > >
> > > >
> > > > 5 aug 2015 kl. 18:39 skrev SARRA KTITI <sarraktiti at gmail.com
> > > > <mailto:sarraktiti at gmail.com>>:
> > > >
> > > >> Thanks for your quick reply Carl ,
> > > >>
> > > >> yes that?s what i meant , to send and receive text messages as in
> > > >> SMS.Still the idea feasible ?
> > > >>
> > > >> Bests,
> > > >> sarra
> > > >>
> > > >> 2015-08-05 18:25 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com
> > > >> <mailto:carlolsson.co at gmail.com>>:
> > > >>
> > > >> Np, however when reading your question again maybe I misunderstood
> > > >> you.
> > > >> Did you mean to send and receive text messages as in SMS?
> > > >>
> > > >> If that is not what you want to do but instead build a data link
> > > >> for any text message between e.g. two hackrf I would start with
> > > >> gnuradio companion. You don't need matlab or any other tool for
> > > that.
> > > >>
> > > >> Best
> > > >>
> > > >>
> > > >> 5 aug 2015 kl. 18:06 skrev SARRA KTITI <sarraktiti at gmail.com
> > > >> <mailto:sarraktiti at gmail.com>>:
> > > >>
> > > >>> Thanks Carl,
> > > >>> This is the first time that i use HackRF so , sorry if my
> > > >>> question seems to be so basic.
> > > >>> Should i use matlab or another tool in addition to gnuradio
> > > >>> companion to develop this idea?
> > > >>> Could someone please give me a hint on how to proceed?
> > > >>>
> > > >>> 2015-08-05 17:48 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com
> > > >>> <mailto:carlolsson.co at gmail.com>>:
> > > >>>
> > > >>> Hi,
> > > >>>
> > > >>> Yes it is very feasible to build a transmitter and receiver
> > > >>> for text messages. You would have to decide on how to encode
> > > >>> the text, which modulation to use etc.
> > > >>>
> > > >>> Best,
> > > >>> Carl
> > > >>>
> > > >>> 5 aug 2015 kl. 17:21 skrev SARRA KTITI <sarraktiti at gmail.com
> > > >>> <mailto:sarraktiti at gmail.com>>:
> > > >>>
> > > >>>> Hi,
> > > >>>>
> > > >>>> I just got my HackRF One and i am trying to discover what
> > > >>>> can do with it.
> > > >>>>
> > > >>>> My question is :
> > > >>>>
> > > >>>> From my understanding HackRF One use software to build radio
> > > >>>> system and utilise the radio spectrum instead in working on
> > > >>>> Hardware . So can i build a platform that use HackRF One to
> > > >>>> send and receive text message ? Is the idea feasible?
> > > >>>>
> > > >>>> Sarah Ktiti,
> > > >>>>
> > > >>>> Bests,
> > > >>>>
> > > >>>>
> > > >>>>
> > > >>>> _______________________________________________
> > > >>>> HackRF-dev mailing list
> > > >>>> HackRF-dev at greatscottgadgets.com
> > > >>>> <mailto:HackRF-dev at greatscottgadgets.com>
> > > >>>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> > > >>>
> > > >>>
> > > >>
> > > >
> > > >
> > > > _______________________________________________
> > > > HackRF-dev mailing list
> > > > HackRF-dev at greatscottgadgets.com
> > > > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> > > >
> > >
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> > https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150806/043c7e7d/attachment-0001.html
> > >
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > _______________________________________________
> > HackRF-dev mailing list
> > HackRF-dev at greatscottgadgets.com
> > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >
> >
> > ------------------------------
> >
> > End of HackRF-dev Digest, Vol 33, Issue 4
> > *****************************************
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150807/e8763329/attachment-0001.html>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 7 Aug 2015 13:29:34 +0200
> From: Mitja kocjan?i? <veso266 at gmail.com>
> To: SARRA KTITI <sarraktiti at gmail.com>
> Cc: "hackrf-dev at greatscottgadgets.com"
> <hackrf-dev at greatscottgadgets.com>
> Subject: Re: [Hackrf-dev] HackRF-dev Digest, Vol 33, Issue 4
> Message-ID:
> <CACC-Vny9YKCtGZhjhR_BWE2MH7SqBgZDgkD=H6gH3J7V1XpSbg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I all depend on freqency that you are transmitting on for instance I tried
> on 76 Mhz (WBFM Modulation with stereo and RDS) with telescopic HackRF
> Antena and I can hear it 1 KM away then I tried on my 9 Element Directional
> Yagi and I can get the station 2 KM far away (not all directions of course
> because thats yagi) but on 10 Mhz AM Stereo I can't even get 100 meters (I
> tried at night) (at day it is even shorter)
>
> 2015-08-07 11:20 GMT+02:00 SARRA KTITI <sarraktiti at gmail.com>:
>
> > Thanks Paul i will try this solution too ,
> >
> > One more question please ,can someone tell me about the maximum
> > transmission distance of HackRF device .
> >
> > Bests,
> > Sarra Ktiti
> >
> > 2015-08-06 7:30 GMT+02:00 <hackrf-dev-request at greatscottgadgets.com>:
> >
> >> Send HackRF-dev mailing list submissions to
> >> hackrf-dev at greatscottgadgets.com
> >>
> >> To subscribe or unsubscribe via the World Wide Web, visit
> >> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >> or, via email, send a message with subject or body 'help' to
> >> hackrf-dev-request at greatscottgadgets.com
> >>
> >> You can reach the person managing the list at
> >> hackrf-dev-owner at greatscottgadgets.com
> >>
> >> When replying, please edit your Subject line so it is more specific
> >> than "Re: Contents of HackRF-dev digest..."
> >>
> >>
> >> Today's Topics:
> >>
> >> 1. feasible idea using HackRF One (SARRA KTITI)
> >> 2. Re: feasible idea using HackRF One (Carl Olsson)
> >> 3. Re: feasible idea using HackRF One (SARRA KTITI)
> >> 4. Re: feasible idea using HackRF One (Carl Olsson)
> >> 5. Re: feasible idea using HackRF One (SARRA KTITI)
> >> 6. Re: feasible idea using HackRF One (Carl Olsson)
> >> 7. Re: feasible idea using HackRF One (Martin Holst Swende)
> >> 8. Re: feasible idea using HackRF One (Paul Connolly)
> >> 9. Re: feasible idea using HackRF One (SARRA KTITI)
> >>
> >>
> >> ----------------------------------------------------------------------
> >>
> >> Message: 1
> >> Date: Wed, 5 Aug 2015 17:21:42 +0200
> >> From: SARRA KTITI <sarraktiti at gmail.com>
> >> To: hackrf-dev at greatscottgadgets.com
> >> Subject: [Hackrf-dev] feasible idea using HackRF One
> >> Message-ID:
> >> <
> >> CAJZUweFv472sxhsNkrTBnrgQ16VAbig7ic+FTHentp5eGGUQYw at mail.gmail.com>
> >> Content-Type: text/plain; charset="utf-8"
> >>
> >> Hi,
> >>
> >> I just got my HackRF One and i am trying to discover what can do with it.
> >>
> >> My question is :
> >>
> >> >From my understanding HackRF One use software to build radio system and
> >> utilise the radio spectrum instead in working on Hardware . So can i build
> >> a platform that use HackRF One to send and receive text message ? Is the
> >> idea feasible?
> >>
> >> Sarah Ktiti,
> >>
> >> Bests,
> >> -------------- next part --------------
> >> An HTML attachment was scrubbed...
> >> URL: <
> >> https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/ba022784/attachment-0001.html
> >> >
> >>
> >> ------------------------------
> >>
> >> Message: 2
> >> Date: Wed, 5 Aug 2015 17:48:40 +0200
> >> From: Carl Olsson <carlolsson.co at gmail.com>
> >> To: SARRA KTITI <sarraktiti at gmail.com>
> >> Cc: "hackrf-dev at greatscottgadgets.com"
> >> <hackrf-dev at greatscottgadgets.com>
> >> Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> >> Message-ID: <C8B3C864-EDDF-447D-8A3C-9945DAE741F9 at gmail.com>
> >> Content-Type: text/plain; charset="us-ascii"
> >>
> >> Hi,
> >>
> >> Yes it is very feasible to build a transmitter and receiver for text
> >> messages. You would have to decide on how to encode the text, which
> >> modulation to use etc.
> >>
> >> Best,
> >> Carl
> >>
> >> > 5 aug 2015 kl. 17:21 skrev SARRA KTITI <sarraktiti at gmail.com>:
> >> >
> >> > Hi,
> >> > I just got my HackRF One and i am trying to discover what can do with
> >> it.
> >> > My question is :
> >> > From my understanding HackRF One use software to build radio system and
> >> utilise the radio spectrum instead in working on Hardware . So can i build
> >> a platform that use HackRF One to send and receive text message ? Is the
> >> idea feasible?
> >> >
> >> > Sarah Ktiti,
> >> > Bests,
> >> >
> >> >
> >> > _______________________________________________
> >> > HackRF-dev mailing list
> >> > HackRF-dev at greatscottgadgets.com
> >> > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >> -------------- next part --------------
> >> An HTML attachment was scrubbed...
> >> URL: <
> >> https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/5d172910/attachment-0001.html
> >> >
> >>
> >> ------------------------------
> >>
> >> Message: 3
> >> Date: Wed, 5 Aug 2015 18:06:47 +0200
> >> From: SARRA KTITI <sarraktiti at gmail.com>
> >> To: Carl Olsson <carlolsson.co at gmail.com>
> >> Cc: "hackrf-dev at greatscottgadgets.com"
> >> <hackrf-dev at greatscottgadgets.com>
> >> Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> >> Message-ID:
> >> <
> >> CAJZUweFp7COYGSMBhCvhUobZEWrOKOwJQmWkABy6FzsXFVgKjA at mail.gmail.com>
> >> Content-Type: text/plain; charset="utf-8"
> >>
> >> Thanks Carl,
> >> This is the first time that i use HackRF so , sorry if my question seems
> >> to
> >> be so basic.
> >> Should i use matlab or another tool in addition to gnuradio companion to
> >> develop this idea?
> >> Could someone please give me a hint on how to proceed?
> >>
> >> 2015-08-05 17:48 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> >>
> >> > Hi,
> >> >
> >> > Yes it is very feasible to build a transmitter and receiver for text
> >> > messages. You would have to decide on how to encode the text, which
> >> > modulation to use etc.
> >> >
> >> > Best,
> >> > Carl
> >> >
> >> > 5 aug 2015 kl. 17:21 skrev SARRA KTITI <sarraktiti at gmail.com>:
> >> >
> >> > Hi,
> >> >
> >> > I just got my HackRF One and i am trying to discover what can do with
> >> it.
> >> >
> >> > My question is :
> >> >
> >> > From my understanding HackRF One use software to build radio system and
> >> > utilise the radio spectrum instead in working on Hardware . So can i
> >> build
> >> > a platform that use HackRF One to send and receive text message ? Is the
> >> > idea feasible?
> >> >
> >> > Sarah Ktiti,
> >> >
> >> > Bests,
> >> >
> >> >
> >> >
> >> > _______________________________________________
> >> > HackRF-dev mailing list
> >> > HackRF-dev at greatscottgadgets.com
> >> > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >> >
> >> >
> >> -------------- next part --------------
> >> An HTML attachment was scrubbed...
> >> URL: <
> >> https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/cfde009a/attachment-0001.html
> >> >
> >>
> >> ------------------------------
> >>
> >> Message: 4
> >> Date: Wed, 5 Aug 2015 18:25:31 +0200
> >> From: Carl Olsson <carlolsson.co at gmail.com>
> >> To: SARRA KTITI <sarraktiti at gmail.com>
> >> Cc: "hackrf-dev at greatscottgadgets.com"
> >> <hackrf-dev at greatscottgadgets.com>
> >> Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> >> Message-ID: <66701B53-9FD4-4879-A3B4-57AA11DF05C6 at gmail.com>
> >> Content-Type: text/plain; charset="us-ascii"
> >>
> >> Np, however when reading your question again maybe I misunderstood you.
> >> Did you mean to send and receive text messages as in SMS?
> >>
> >> If that is not what you want to do but instead build a data link for any
> >> text message between e.g. two hackrf I would start with gnuradio companion.
> >> You don't need matlab or any other tool for that.
> >>
> >> Best
> >>
> >>
> >> > 5 aug 2015 kl. 18:06 skrev SARRA KTITI <sarraktiti at gmail.com>:
> >> >
> >> > Thanks Carl,
> >> > This is the first time that i use HackRF so , sorry if my question
> >> seems to be so basic.
> >> > Should i use matlab or another tool in addition to gnuradio companion
> >> to develop this idea?
> >> > Could someone please give me a hint on how to proceed?
> >> >
> >> > 2015-08-05 17:48 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> >> >> Hi,
> >> >>
> >> >> Yes it is very feasible to build a transmitter and receiver for text
> >> messages. You would have to decide on how to encode the text, which
> >> modulation to use etc.
> >> >>
> >> >> Best,
> >> >> Carl
> >> >>
> >> >>> 5 aug 2015 kl. 17:21 skrev SARRA KTITI <sarraktiti at gmail.com>:
> >> >>>
> >> >>> Hi,
> >> >>> I just got my HackRF One and i am trying to discover what can do with
> >> it.
> >> >>> My question is :
> >> >>> From my understanding HackRF One use software to build radio system
> >> and utilise the radio spectrum instead in working on Hardware . So can i
> >> build a platform that use HackRF One to send and receive text message ? Is
> >> the idea feasible?
> >> >>>
> >> >>> Sarah Ktiti,
> >> >>> Bests,
> >> >>>
> >> >>>
> >> >>> _______________________________________________
> >> >>> HackRF-dev mailing list
> >> >>> HackRF-dev at greatscottgadgets.com
> >> >>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >> >
> >> -------------- next part --------------
> >> An HTML attachment was scrubbed...
> >> URL: <
> >> https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/72322a0b/attachment-0001.html
> >> >
> >>
> >> ------------------------------
> >>
> >> Message: 5
> >> Date: Wed, 5 Aug 2015 18:39:08 +0200
> >> From: SARRA KTITI <sarraktiti at gmail.com>
> >> To: Carl Olsson <carlolsson.co at gmail.com>
> >> Cc: "hackrf-dev at greatscottgadgets.com"
> >> <hackrf-dev at greatscottgadgets.com>
> >> Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> >> Message-ID:
> >> <CAJZUweExPwC=
> >> fU30gX1uMbpJMhcRdEPXqqSBKBbSX5u9sjLZ1w at mail.gmail.com>
> >> Content-Type: text/plain; charset="utf-8"
> >>
> >> Thanks for your quick reply Carl ,
> >>
> >> yes that?s what i meant , to send and receive text messages as in
> >> SMS.Still the idea feasible ?
> >>
> >> Bests,
> >> sarra
> >>
> >> 2015-08-05 18:25 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> >>
> >> > Np, however when reading your question again maybe I misunderstood you.
> >> > Did you mean to send and receive text messages as in SMS?
> >> >
> >> > If that is not what you want to do but instead build a data link for any
> >> > text message between e.g. two hackrf I would start with gnuradio
> >> companion.
> >> > You don't need matlab or any other tool for that.
> >> >
> >> > Best
> >> >
> >> >
> >> > 5 aug 2015 kl. 18:06 skrev SARRA KTITI <sarraktiti at gmail.com>:
> >> >
> >> > Thanks Carl,
> >> > This is the first time that i use HackRF so , sorry if my question seems
> >> > to be so basic.
> >> > Should i use matlab or another tool in addition to gnuradio companion
> >> to
> >> > develop this idea?
> >> > Could someone please give me a hint on how to proceed?
> >> >
> >> > 2015-08-05 17:48 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> >> >
> >> >> Hi,
> >> >>
> >> >> Yes it is very feasible to build a transmitter and receiver for text
> >> >> messages. You would have to decide on how to encode the text, which
> >> >> modulation to use etc.
> >> >>
> >> >> Best,
> >> >> Carl
> >> >>
> >> >> 5 aug 2015 kl. 17:21 skrev SARRA KTITI <sarraktiti at gmail.com>:
> >> >>
> >> >> Hi,
> >> >>
> >> >> I just got my HackRF One and i am trying to discover what can do with
> >> it.
> >> >>
> >> >> My question is :
> >> >>
> >> >> From my understanding HackRF One use software to build radio system and
> >> >> utilise the radio spectrum instead in working on Hardware . So can i
> >> build
> >> >> a platform that use HackRF One to send and receive text message ? Is
> >> the
> >> >> idea feasible?
> >> >>
> >> >> Sarah Ktiti,
> >> >>
> >> >> Bests,
> >> >>
> >> >>
> >> >>
> >> >> _______________________________________________
> >> >> HackRF-dev mailing list
> >> >> HackRF-dev at greatscottgadgets.com
> >> >> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >> >>
> >> >>
> >> >
> >> -------------- next part --------------
> >> An HTML attachment was scrubbed...
> >> URL: <
> >> https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/40ce5eb0/attachment-0001.html
> >> >
> >>
> >> ------------------------------
> >>
> >> Message: 6
> >> Date: Wed, 5 Aug 2015 19:36:13 +0200
> >> From: Carl Olsson <carlolsson.co at gmail.com>
> >> To: SARRA KTITI <sarraktiti at gmail.com>
> >> Cc: "hackrf-dev at greatscottgadgets.com"
> >> <hackrf-dev at greatscottgadgets.com>
> >> Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> >> Message-ID: <E1E82893-2B31-432A-9604-B3F0B9B8581E at gmail.com>
> >> Content-Type: text/plain; charset="utf-8"
> >>
> >> Ok, then I am afraid someone else more experienced will have to answer.
> >> You can look into openBTS, it's for the base station but maybe you will
> >> find useful information there.
> >>
> >> Good luck!
> >>
> >>
> >>
> >> > 5 aug 2015 kl. 18:39 skrev SARRA KTITI <sarraktiti at gmail.com>:
> >> >
> >> > Thanks for your quick reply Carl ,
> >> >
> >> > yes that?s what i meant , to send and receive text messages as in
> >> SMS.Still the idea feasible ?
> >> >
> >> > Bests,
> >> > sarra
> >> >
> >> > 2015-08-05 18:25 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> >> >> Np, however when reading your question again maybe I misunderstood you.
> >> >> Did you mean to send and receive text messages as in SMS?
> >> >>
> >> >> If that is not what you want to do but instead build a data link for
> >> any text message between e.g. two hackrf I would start with gnuradio
> >> companion. You don't need matlab or any other tool for that.
> >> >>
> >> >> Best
> >> >>
> >> >>
> >> >>> 5 aug 2015 kl. 18:06 skrev SARRA KTITI <sarraktiti at gmail.com>:
> >> >>>
> >> >>> Thanks Carl,
> >> >>> This is the first time that i use HackRF so , sorry if my question
> >> seems to be so basic.
> >> >>> Should i use matlab or another tool in addition to gnuradio
> >> companion to develop this idea?
> >> >>> Could someone please give me a hint on how to proceed?
> >> >>>
> >> >>> 2015-08-05 17:48 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> >> >>>> Hi,
> >> >>>>
> >> >>>> Yes it is very feasible to build a transmitter and receiver for text
> >> messages. You would have to decide on how to encode the text, which
> >> modulation to use etc.
> >> >>>>
> >> >>>> Best,
> >> >>>> Carl
> >> >>>>
> >> >>>>> 5 aug 2015 kl. 17:21 skrev SARRA KTITI <sarraktiti at gmail.com>:
> >> >>>>>
> >> >>>>> Hi,
> >> >>>>> I just got my HackRF One and i am trying to discover what can do
> >> with it.
> >> >>>>> My question is :
> >> >>>>> From my understanding HackRF One use software to build radio system
> >> and utilise the radio spectrum instead in working on Hardware . So can i
> >> build a platform that use HackRF One to send and receive text message ? Is
> >> the idea feasible?
> >> >>>>>
> >> >>>>> Sarah Ktiti,
> >> >>>>> Bests,
> >> >>>>>
> >> >>>>>
> >> >>>>> _______________________________________________
> >> >>>>> HackRF-dev mailing list
> >> >>>>> HackRF-dev at greatscottgadgets.com
> >> >>>>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >> >
> >> -------------- next part --------------
> >> An HTML attachment was scrubbed...
> >> URL: <
> >> https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/e66e8c42/attachment-0001.html
> >> >
> >>
> >> ------------------------------
> >>
> >> Message: 7
> >> Date: Wed, 05 Aug 2015 20:43:41 +0200
> >> From: Martin Holst Swende <martin at swende.se>
> >> To: Carl Olsson <carlolsson.co at gmail.com>, SARRA KTITI
> >> <sarraktiti at gmail.com>
> >> Cc: "hackrf-dev at greatscottgadgets.com"
> >> <hackrf-dev at greatscottgadgets.com>
> >> Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> >> Message-ID: <55C2595D.6050506 at swende.se>
> >> Content-Type: text/plain; charset=windows-1252
> >>
> >> I think the idea is feasible, but it's definitely not a simple project.
> >>
> >> I can recommend reading through the blog posts starting with this one;
> >> http://domonkos.tomcsanyi.net/?p=418 . It's related to GSM over SDR, not
> >> specifically regarding SMS.
> >>
> >> The blog posts above might be a good place to start, anyway.
> >> Cheers,
> >> Martin
> >>
> >> On 2015-08-05 19:36, Carl Olsson wrote:
> >> > Ok, then I am afraid someone else more experienced will have to answer.
> >> > You can look into openBTS, it's for the base station but maybe you will
> >> > find useful information there.
> >> >
> >> > Good luck!
> >> >
> >> >
> >> >
> >> > 5 aug 2015 kl. 18:39 skrev SARRA KTITI <sarraktiti at gmail.com
> >> > <mailto:sarraktiti at gmail.com>>:
> >> >
> >> >> Thanks for your quick reply Carl ,
> >> >>
> >> >> yes that?s what i meant , to send and receive text messages as in
> >> >> SMS.Still the idea feasible ?
> >> >>
> >> >> Bests,
> >> >> sarra
> >> >>
> >> >> 2015-08-05 18:25 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com
> >> >> <mailto:carlolsson.co at gmail.com>>:
> >> >>
> >> >> Np, however when reading your question again maybe I misunderstood
> >> >> you.
> >> >> Did you mean to send and receive text messages as in SMS?
> >> >>
> >> >> If that is not what you want to do but instead build a data link
> >> >> for any text message between e.g. two hackrf I would start with
> >> >> gnuradio companion. You don't need matlab or any other tool for
> >> that.
> >> >>
> >> >> Best
> >> >>
> >> >>
> >> >> 5 aug 2015 kl. 18:06 skrev SARRA KTITI <sarraktiti at gmail.com
> >> >> <mailto:sarraktiti at gmail.com>>:
> >> >>
> >> >>> Thanks Carl,
> >> >>> This is the first time that i use HackRF so , sorry if my
> >> >>> question seems to be so basic.
> >> >>> Should i use matlab or another tool in addition to gnuradio
> >> >>> companion to develop this idea?
> >> >>> Could someone please give me a hint on how to proceed?
> >> >>>
> >> >>> 2015-08-05 17:48 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com
> >> >>> <mailto:carlolsson.co at gmail.com>>:
> >> >>>
> >> >>> Hi,
> >> >>>
> >> >>> Yes it is very feasible to build a transmitter and receiver
> >> >>> for text messages. You would have to decide on how to encode
> >> >>> the text, which modulation to use etc.
> >> >>>
> >> >>> Best,
> >> >>> Carl
> >> >>>
> >> >>> 5 aug 2015 kl. 17:21 skrev SARRA KTITI <sarraktiti at gmail.com
> >> >>> <mailto:sarraktiti at gmail.com>>:
> >> >>>
> >> >>>> Hi,
> >> >>>>
> >> >>>> I just got my HackRF One and i am trying to discover what
> >> >>>> can do with it.
> >> >>>>
> >> >>>> My question is :
> >> >>>>
> >> >>>> From my understanding HackRF One use software to build radio
> >> >>>> system and utilise the radio spectrum instead in working on
> >> >>>> Hardware . So can i build a platform that use HackRF One to
> >> >>>> send and receive text message ? Is the idea feasible?
> >> >>>>
> >> >>>> Sarah Ktiti,
> >> >>>>
> >> >>>> Bests,
> >> >>>>
> >> >>>>
> >> >>>>
> >> >>>> _______________________________________________
> >> >>>> HackRF-dev mailing list
> >> >>>> HackRF-dev at greatscottgadgets.com
> >> >>>> <mailto:HackRF-dev at greatscottgadgets.com>
> >> >>>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >> >>>
> >> >>>
> >> >>
> >> >
> >> >
> >> > _______________________________________________
> >> > HackRF-dev mailing list
> >> > HackRF-dev at greatscottgadgets.com
> >> > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >> >
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 8
> >> Date: Wed, 5 Aug 2015 20:22:29 +0100
> >> From: Paul Connolly <eeipcy at gmail.com>
> >> To: hackrf-dev at greatscottgadgets.com
> >> Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> >> Message-ID: <55C26275.4090105 at gmail.com>
> >> Content-Type: text/plain; charset="windows-1252"
> >>
> >> I'd go the path of least resistance (cost and time) and buy a SIM card
> >> from a telco and use one of these:
> >> https://www.adafruit.com/products/1946
> >>
> >> http://www.aliexpress.com/item/Free-Shipping-Original-SIM800H-SIMCOM-GSM-GPRS-Quad-Band-LGA-power-consumption-is-very-low-We/1351765072.html
> >>
> >> On 05/08/2015 17:39, SARRA KTITI wrote:
> >> > Thanks for your quick reply Carl ,
> >> >
> >> > yes that?s what i meant , to send and receive text messages as in
> >> > SMS.Still the idea feasible ?
> >> >
> >> > Bests,
> >> > sarra
> >> >
> >> > 2015-08-05 18:25 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> >> >
> >> >> Np, however when reading your question again maybe I misunderstood you.
> >> >> Did you mean to send and receive text messages as in SMS?
> >> >>
> >> >> If that is not what you want to do but instead build a data link for
> >> any
> >> >> text message between e.g. two hackrf I would start with gnuradio
> >> companion.
> >> >> You don't need matlab or any other tool for that.
> >> >>
> >> >> Best
> >> >>
> >> >>
> >> >> 5 aug 2015 kl. 18:06 skrev SARRA KTITI <sarraktiti at gmail.com>:
> >> >>
> >> >> Thanks Carl,
> >> >> This is the first time that i use HackRF so , sorry if my question
> >> seems
> >> >> to be so basic.
> >> >> Should i use matlab or another tool in addition to gnuradio
> >> companion to
> >> >> develop this idea?
> >> >> Could someone please give me a hint on how to proceed?
> >> >>
> >> >> 2015-08-05 17:48 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com>:
> >> >>
> >> >>> Hi,
> >> >>>
> >> >>> Yes it is very feasible to build a transmitter and receiver for text
> >> >>> messages. You would have to decide on how to encode the text, which
> >> >>> modulation to use etc.
> >> >>>
> >> >>> Best,
> >> >>> Carl
> >> >>>
> >> >>> 5 aug 2015 kl. 17:21 skrev SARRA KTITI <sarraktiti at gmail.com>:
> >> >>>
> >> >>> Hi,
> >> >>>
> >> >>> I just got my HackRF One and i am trying to discover what can do with
> >> it.
> >> >>>
> >> >>> My question is :
> >> >>>
> >> >>> From my understanding HackRF One use software to build radio system
> >> and
> >> >>> utilise the radio spectrum instead in working on Hardware . So can i
> >> build
> >> >>> a platform that use HackRF One to send and receive text message ? Is
> >> the
> >> >>> idea feasible?
> >> >>>
> >> >>> Sarah Ktiti,
> >> >>>
> >> >>> Bests,
> >> >>>
> >> >>>
> >> >>>
> >> >>> _______________________________________________
> >> >>> HackRF-dev mailing list
> >> >>> HackRF-dev at greatscottgadgets.com
> >> >>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >> >>>
> >> >>>
> >> >
> >> >
> >> > _______________________________________________
> >> > HackRF-dev mailing list
> >> > HackRF-dev at greatscottgadgets.com
> >> > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >>
> >> -------------- next part --------------
> >> An HTML attachment was scrubbed...
> >> URL: <
> >> https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/97c7a904/attachment-0001.html
> >> >
> >> -------------- next part --------------
> >> A non-text attachment was scrubbed...
> >> Name: signature.asc
> >> Type: application/pgp-signature
> >> Size: 834 bytes
> >> Desc: OpenPGP digital signature
> >> URL: <
> >> https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150805/97c7a904/attachment-0001.pgp
> >> >
> >>
> >> ------------------------------
> >>
> >> Message: 9
> >> Date: Thu, 6 Aug 2015 00:29:59 +0200
> >> From: SARRA KTITI <sarraktiti at gmail.com>
> >> To: Martin Holst Swende <martin at swende.se>
> >> Cc: Carl Olsson <carlolsson.co at gmail.com>,
> >> "hackrf-dev at greatscottgadgets.com" <
> >> hackrf-dev at greatscottgadgets.com>
> >> Subject: Re: [Hackrf-dev] feasible idea using HackRF One
> >> Message-ID:
> >> <CAJZUweFrd5+hM=73LWLyGnR_ov5=
> >> yiQdSqpoLfNYZDKuwp1NQw at mail.gmail.com>
> >> Content-Type: text/plain; charset="utf-8"
> >>
> >> Thanks alot for your response Martin.
> >>
> >> 2015-08-05 20:43 GMT+02:00 Martin Holst Swende <martin at swende.se>:
> >>
> >> > I think the idea is feasible, but it's definitely not a simple project.
> >> >
> >> > I can recommend reading through the blog posts starting with this one;
> >> > http://domonkos.tomcsanyi.net/?p=418 . It's related to GSM over SDR,
> >> not
> >> > specifically regarding SMS.
> >> >
> >> > The blog posts above might be a good place to start, anyway.
> >> > Cheers,
> >> > Martin
> >> >
> >> > On 2015-08-05 19:36, Carl Olsson wrote:
> >> > > Ok, then I am afraid someone else more experienced will have to
> >> answer.
> >> > > You can look into openBTS, it's for the base station but maybe you
> >> will
> >> > > find useful information there.
> >> > >
> >> > > Good luck!
> >> > >
> >> > >
> >> > >
> >> > > 5 aug 2015 kl. 18:39 skrev SARRA KTITI <sarraktiti at gmail.com
> >> > > <mailto:sarraktiti at gmail.com>>:
> >> > >
> >> > >> Thanks for your quick reply Carl ,
> >> > >>
> >> > >> yes that?s what i meant , to send and receive text messages as in
> >> > >> SMS.Still the idea feasible ?
> >> > >>
> >> > >> Bests,
> >> > >> sarra
> >> > >>
> >> > >> 2015-08-05 18:25 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com
> >> > >> <mailto:carlolsson.co at gmail.com>>:
> >> > >>
> >> > >> Np, however when reading your question again maybe I
> >> misunderstood
> >> > >> you.
> >> > >> Did you mean to send and receive text messages as in SMS?
> >> > >>
> >> > >> If that is not what you want to do but instead build a data link
> >> > >> for any text message between e.g. two hackrf I would start with
> >> > >> gnuradio companion. You don't need matlab or any other tool for
> >> > that.
> >> > >>
> >> > >> Best
> >> > >>
> >> > >>
> >> > >> 5 aug 2015 kl. 18:06 skrev SARRA KTITI <sarraktiti at gmail.com
> >> > >> <mailto:sarraktiti at gmail.com>>:
> >> > >>
> >> > >>> Thanks Carl,
> >> > >>> This is the first time that i use HackRF so , sorry if my
> >> > >>> question seems to be so basic.
> >> > >>> Should i use matlab or another tool in addition to gnuradio
> >> > >>> companion to develop this idea?
> >> > >>> Could someone please give me a hint on how to proceed?
> >> > >>>
> >> > >>> 2015-08-05 17:48 GMT+02:00 Carl Olsson <carlolsson.co at gmail.com
> >> > >>> <mailto:carlolsson.co at gmail.com>>:
> >> > >>>
> >> > >>> Hi,
> >> > >>>
> >> > >>> Yes it is very feasible to build a transmitter and receiver
> >> > >>> for text messages. You would have to decide on how to encode
> >> > >>> the text, which modulation to use etc.
> >> > >>>
> >> > >>> Best,
> >> > >>> Carl
> >> > >>>
> >> > >>> 5 aug 2015 kl. 17:21 skrev SARRA KTITI <
> >> sarraktiti at gmail.com
> >> > >>> <mailto:sarraktiti at gmail.com>>:
> >> > >>>
> >> > >>>> Hi,
> >> > >>>>
> >> > >>>> I just got my HackRF One and i am trying to discover what
> >> > >>>> can do with it.
> >> > >>>>
> >> > >>>> My question is :
> >> > >>>>
> >> > >>>> From my understanding HackRF One use software to build
> >> radio
> >> > >>>> system and utilise the radio spectrum instead in working on
> >> > >>>> Hardware . So can i build a platform that use HackRF One to
> >> > >>>> send and receive text message ? Is the idea feasible?
> >> > >>>>
> >> > >>>> Sarah Ktiti,
> >> > >>>>
> >> > >>>> Bests,
> >> > >>>>
> >> > >>>>
> >> > >>>>
> >> > >>>> _______________________________________________
> >> > >>>> HackRF-dev mailing list
> >> > >>>> HackRF-dev at greatscottgadgets.com
> >> > >>>> <mailto:HackRF-dev at greatscottgadgets.com>
> >> > >>>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >> > >>>
> >> > >>>
> >> > >>
> >> > >
> >> > >
> >> > > _______________________________________________
> >> > > HackRF-dev mailing list
> >> > > HackRF-dev at greatscottgadgets.com
> >> > > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >> > >
> >> >
> >> >
> >> -------------- next part --------------
> >> An HTML attachment was scrubbed...
> >> URL: <
> >> https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150806/043c7e7d/attachment-0001.html
> >> >
> >>
> >> ------------------------------
> >>
> >> Subject: Digest Footer
> >>
> >> _______________________________________________
> >> HackRF-dev mailing list
> >> HackRF-dev at greatscottgadgets.com
> >> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >>
> >>
> >> ------------------------------
> >>
> >> End of HackRF-dev Digest, Vol 33, Issue 4
> >> *****************************************
> >>
> >
> >
> > _______________________________________________
> > HackRF-dev mailing list
> > HackRF-dev at greatscottgadgets.com
> > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150807/530b378f/attachment-0001.html>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 7 Aug 2015 19:17:34 +0000 (UTC)
> From: Non Yeah <nonyeah at rocketmail.com>
> To: "hackrf-dev at greatscottgadgets.com"
> <hackrf-dev at greatscottgadgets.com>
> Subject: [Hackrf-dev] Com/Serial Port Access to HackRF
> Message-ID:
> <397949628.865628.1438975054303.JavaMail.yahoo at mail.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> Thank you for the suggestions. How do I use the libhackrf file? Were does it reside (how do I get it)? Is it GNU compatible only? Can I the libhackrf file with Windows using SDR# (which to my knowledge is the only Windows software compatible with HackRF).
> Thanks!
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150807/6d42afe1/attachment-0001.html>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
>
> ------------------------------
>
> End of HackRF-dev Digest, Vol 33, Issue 5
> *****************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150808/56185ffd/attachment.html>
More information about the HackRF-dev
mailing list