[Hackrf-dev] HackRF One coverage

[Mitja kocjančič]

TX Power depends on varaety of factors (frequency, IF, RF, BB Gain)
unfortiunatly there is no TX Power value in osmocom block so that means you
must tinker with RF and IF Gain (if you want 15dbm on 76 Mhz you put
everything to maximum (as I can't remember maximum values for IF, RF and BB
Gain I just put 1000 in every field)

On which frequency did you mesure coverage? (I can get (on 76 Mhz) 1 KM
using ANT500 Antena (you can always use external amplifier to boost the
coverage or you can any directional antena (yagi for instance (antena
designed for specific freqency like 98Mhz (it works on upper frequencys too
but it won't preform as well))

I know that if I try to transmitt AM below 10 Mhz like 1 Mhz or 918khz I
can't even get to 1m if I try on 10 Mhz I can get 2 meters
I didn't try on 2 GHZ because I don't have any good equpment (that would
demodulate signal only) I have RTL-SDR But thats crap for sensitivity so
don't use it to mesure anything






2015-12-09 11:34 GMT+01:00 김상혁 <tkdgur7896 at gmail.com>:

> Hi. I tried to send data and receive that using two hackrf one devices.
>
> In my test, hackrf can’t communicate if distance over about 1.5m
>
> What is the coverage of hackrf one ?
>
> And how can increase this coverage ?
>
> If it is solved by increasing Tx power, how can increase Tx power using
> osmocom block, which parameter effect to Tx power ?
>
> Thanks every replies .
>
>
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20151209/2a4cebc5/attachment.html>