[Hackrf-dev] Sensitivity

[Paul Jones]

I originally noticed the problem when going through the SDR lessons (Great job there BTW !)
I’ve since upgraded the firmware to the latest and installed gnuradio using pybombs.
I’ve captured two screenshots from SDR# and Gqrx. I’ve adjusted the gains to get the best signal-noise ratio that I can.
I’ve moved house in the last few weeks to a much more “quiet” area with better signal strength so now I can at least tune other stations besides 96.1 and get something more than static. I think one of my previous neighbours had a switching power supply that was defective, and flooding the spectrum with harmonics.

I’m not sure if attatchments are allowed here, so here are some screenshots on flickr
https://www.flickr.com/photos/73008457@N00/15773951373/in/photostream/
https://www.flickr.com/photos/73008457@N00/16367983856/in/photostream/

Thanks,
Paul.


From: Mike Carden [mailto:mike.carden at gmail.com]
Sent: Saturday, 24 January 2015 8:16 PM
To: Paul Jones
Cc: Michael Ossmann; hackrf-dev at greatscottgadgets.com
Subject: Re: [Hackrf-dev] Sensitivity

G'day Paul.

Can you share with us the OS and SDR software that you are using with your hardware?

Ta,
MC


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150129/5ae5eeb1/attachment.html>