[Hackrf-dev] Fw: HackRF One troubles after Firmware Upgrade

[hutz at gmx.at]

Again in plain Text:


Hi at all,
so I am playning now a few days with the HackRF and i made somewhere a misstake at upgrading the box.
Sorry in advance, for my noob questions and bad english, but i try my best :-)
 
The Failure is that now after the upgrade, gqrx and RF-Analyzer at Android, are not showingf the prober spectum. for example the device is not showing the FM-radio-stations. and the peaks i get in this band are not wfm. So it receives something, but what?
 
What i have done i executed this commands:
"hackrf_spiflash -w hackrf_one_usb_rom_to_ram.bin"

"hackrf_cpldjtag -x firmware/cpld/sgpio_if/default.xsvf"

Output of hackrf_info:
Found HackRF board.
Board ID Number: 2 (HackRF One)
Firmware Version: 2014.08.1
Part ID Number: 0xa000cb3c 0x0050474e
Serial Number: 0x00000000 0x00000000 0x14d463dc 0x2f817fe1"
 on Ubuntu:
 cat /proc/version:

"Linux version 3.16.0-30-generic (buildd at kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #40~14.04.1-Ubuntu SMP Thu Jan 15 17:43:14 UTC 2015"
 
Everthing should be up to date and i tried to solve the issue with the DFU procedure:
https://github.com/mossmann/hackrf/wiki/Updating-Firmware#recovering-the-spi-flash-firmware
 
I get an error at the first command:

"dfu-util --device 1fc9:000c --alt 0 --download hackrf_one_usb_ram.dfu"
Output:
"dfu-util 0.5
(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTY
dfu-util does currently only support DFU version 1.0
Filter on vendor = 0x1fc9 product = 0x000c
Opening DFU USB device... ID 1fc9:000c
Run-time device DFU version 0100
Claiming USB DFU Runtime Interface...
Determining device status: state = dfuIDLE, status = 0
WARNING: Runtime device already in DFU state ?!?
Found Runtime: [1fc9:000c] devnum=0, cfg=1, intf=0, alt=0, name="DFU"
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 0100
Device returned transfer size 2048
DFU CRC does not match
Unsupported DFU file revision 0000"
 
 
This is the point where i stuck now... how to rescue my HackRF?
 
Thank you very much in Advance for any hint!
kind regards
hutz
 
Btw, is there a nice procedure / software for sending with the hackrf? thx