[Hackrf-dev] ads-b decoder with hackrf

[Ariel Diaz]

The problem with gr-air-modes and hackrf are the gain settings, no way to specify/adjust the 3 different gain settings available on the hackrf. The only gain setting that can be changed is the amp gain, no setting for lna or vga to make it usable with gr-air-modes. Or at least I wasn't successful at getting more than 1 plane at a time with only the amp gain and I'm only 20-30 miles away from KMCO. I did modify the radio.py on gr-air-modes a while back for my personal use to add the other two gain settings with help from bistromath who pointed me out with some information and it became somewhat usable.
________________________________________
From: HackRF-dev <hackrf-dev-bounces at greatscottgadgets.com> on behalf of Chris Kuethe <chris.kuethe at gmail.com>
Sent: Sunday, May 10, 2015 2:15 AM
To: Tom N
Cc: hackrf-dev at greatscottgadgets.com
Subject: Re: [Hackrf-dev] ads-b decoder with hackrf

https://github.com/bistromath/gr-air-modes

On Sat, May 9, 2015 at 11:04 PM, Tom N <vsboost at hotmail.com> wrote:
> Anybody try decoding ads-b with the hackrf? I know decoding programs such as
> modesdeco2, adsbsharp like many other programs are not compatible with
> hackrf so i tried dump1090 using --ifile and hackrf_transfer sending samples
> to a fifo but no luck.
>
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>



--
GDB has a 'break' feature; why doesn't it have 'fix' too?
_______________________________________________
HackRF-dev mailing list
HackRF-dev at greatscottgadgets.com
https://pairlist9.pair.net/mailman/listinfo/hackrf-dev