[Hackrf-dev] HackRF Transmit

[Mitja kocjančič]

Here you go my MPX Signal generator:
https://github.com/veso266/MPX-Signal-Modulator

2015-09-24 19:21 GMT+02:00 Dominic Spill <dominicgs at gmail.com>:

> On 24 September 2015 at 14:20, Dana Shtun <ve3dss at hotmail.com> wrote:
> > Its a bit of a waste of technology NOT to transmit!
>
> There are definitely HackRF users transmitting in many different bands.
>
> >  - there are bands assigned
> > for unlicensed low power devices (ISM) that can be used to transmit
> without
> > worrying about licensing.
> > 433, 915, etc.... just check your local regulations
>
> These are the bands that I transmit in and are great fun for playing
> with off the shelf wireless devices (remote controls, wireless
> doorbells, zigbee, etc)
>
> I've also seen DAB transmitted from a HackRF One along with other
> broadcast technologies.
>
> > So this is a challenge to the community to help develop the tools and
> > interfaces to turn this wonderful technology into a really useful device
> > for communication as well as experimentation.
>
> I fully support anyone developing tools that make use of the HackRF
> hardware, especially if those tools are open source and can be used by
> other HackRF users.  I'd love to see any of them
>
> I would also like to encourage anyone who has built GNU Radio
> flowgraphs for either transmit or receive to share them, either on
> this list or elsewhere online (github, dropbox, pastebin, etc).  The
> best way for all of us to learn from each other is to share what we
> have discovered by experimentation.
>
> A great place to start is here: https://github.com/argilo/sdr-examples
>
> Dominic
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150924/cf1116b2/attachment.html>