[Hackrf-dev] HackRF not working - help

[Don Gray]

Dominic,
Thanks for the reply! WOW!  Yes it does enumerate when I enter DFU! It is alive!! I had tried this before but must have missed the step of pressing the reset while holding down the DFU. Does this mean the next step is to reload the firmware? 
Thanks,
Don

> From: dominicgs at gmail.com
> Date: Mon, 4 Apr 2016 18:46:38 +0100
> Subject: Re: [Hackrf-dev] HackRF not working - help
> To: dgray00 at hotmail.com
> CC: hackrf-dev at greatscottgadgets.com
> 
> On 4 April 2016 at 13:43, Don Gray <dgray00 at hotmail.com> wrote:
> >
> > So, after some delay, I'm here!
> 
> Welcome!
> 
> >
> > My symptoms:  The 3V3 LED illuminates normally, all other LEDs are
> > illuminated but very dim. If I push RESET, nothing happens. If I push DFU,
> > the RF LED goes out and then if I push RESET the RF LED comes back on (still
> > dim). It does not enumerate on the USB and lsusb doesn't list it.
> 
> When you enter DFU mode, does the HackRF enumerate over USB?  You can
> check to output of dmesg and lsusb to find out.  It should appear as
> an NXP device in DFU mode.
> 
> To enter DFU mode you should hold down the DFU button while pressing
> the reset button.
> 
> Thanks,
>   Dominic
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20160404/590b07cc/attachment.html>