[Hackrf-dev] features

[Iluta V]

I have the same problem. TX with Hackrf also does not stop, also when
clicking on the X to close the running window. This does not hekp at all.
Hackrf kerps transmitting.

Does it have something to do
with installed firmware or its a bug?

To stop TX I can only unplug the Hackrf from PC. Could someone sugfest a
more advanced solution?

Sincerely,

Iluta



On Sunday, January 3, 2016, Paul Connolly <eeipcy at gmail.com> wrote:
> Do not used the stop button within gnuradio companion, instead click on
> the X to close the running window and it will stop TX. I'm pretty sure
> that this is  mentioned in one of the early "SDR with HackRF" videos by
> Michael Ossmann ( http://greatscottgadgets.com/sdr/ ).
>
> As for using two hackrf devices, did you specify which one is which by
> using the last few digits of the serial number in the osmosdr
> source/sink blocks ?
> (ref http://sdr.osmocom.org/trac/wiki/GrOsmoSDR#HackRFSourceSink )
>
> e.g.
> If hackrf_info returns the following two serial numbers:
> Serial Number: 0x######## 0x######## 0x######## 0x12345678
> Serial Number: 0x######## 0x######## 0x######## 0xfedcba98
>
> And you decide to use the first for RX and the second one for TX then:
>
> When you click on properties of your osmosdr source block do you have
> "hackrf=12345678" in your "Device Arguments" ?
> When you click on properties of your osmosdr sink block do you have
> "hackrf=fedcba98" in your "Device Arguments" ?
>
> On 03/01/2016 03:30, Cinaed Simson wrote:
>> Hi - I'm using the HackRF One firmware and software for 2015.7.2 and
>> gnuradio-companion 3.7.5.1 with a pair of HackRF One transceivers.
>>
>> When I'm using gnuradio-companion to transmit, I hit the kill the flow
>> graph button to stop the transmission, it doesn't - I have to hit the
>> reset button on the HackRF One. Is this expected?
>>
>> And when using multiple devices, should I have to plug them in one at
>> time before starting a process for the device?
>>
>> It doesn't matter what device arguments I give to the osmosdr sink, I
>> still have to start them up one at time.
>>
>> -- Cinaed
>> _______________________________________________
>> HackRF-dev mailing list
>> HackRF-dev at greatscottgadgets.com
>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20160103/c56a91ba/attachment.html>