[Hackrf-dev] HackRF Rx Design

[n0p [Luis Bernal]]

You have the hackrf designs on its github repository.
https://github.com/mossmann/hackrf/tree/master/hardware/hackrf-one

2016-07-15 0:20 GMT+02:00 John Wright <cooljohnwright at gmail.com>:

>
> I am building a prototype for a project and think I need a more sensitive
> HackRF One that is Rx *only* from 4GHz -5GHz. I tried using the HackRF
> One for sensitive measurements around the 5GHz band and was unable to
> discern any measurable signal with/without the EMI kit and conducted the
> same tests with another HackRF One user and we arrived at same conclusion.
> The Rx sensitivity rolls off around 3GHz.  I tried a low noise amplifier in
> attempt make any signal stand out to no avail.
>
> I have an organization that wants to help me manufacture my prototype but
> I do not have a PCB design to share nor am I capable.  Is there anything
> anyone could recommend for me to pass on to them that could assist with
> overcoming this roadblock.
>
> I need a basic design to get the wheels rolling and the rest will be
> handled by developers (so I have been told).
>
> Thanks,
> John
>
>
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20160715/006722d6/attachment.html>