[Hackrf-dev] Not recognized USB

[Paul Opitz]

I will add, now that I found this list's archive, that I see some others who had the same or similar issue. None of the tips provided to them helped me, either (different cable, different USB source, etc.). 

    On Saturday, June 4, 2016 11:06 AM, Paul Opitz via HackRF-dev <hackrf-dev at greatscottgadgets.com> wrote:
 
 

 Just got the unit yesterday. Did a f/w update, but after that, neither Windows PC nor Ubuntu (nor Raspberry Pi) will recognize the unit plugged in. If I DFU, then it is recognized.
Tried the DFU firmware update procedure, and it seems to complete, but last message is:
dfu-util: unable to read DFU status after completion.
Non-DFU, lsusb does not show the deviceDFU: lsusb shows:Bus 001 Device 010: ID 1fc9:000c NXP Semiconductors
Non-DFU, hackrf_info  (as root) returns HACKRF_ERROR_NOT_FOUND (-5)
Non-DFU, LEDs are: GREEN ORANGE RED off FLICKER_ORANGE off
Suggestions? Help?


_______________________________________________
HackRF-dev mailing list
HackRF-dev at greatscottgadgets.com
https://pairlist9.pair.net/mailman/listinfo/hackrf-dev


 
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20160604/af07225d/attachment.html>