[Hackrf-dev] FW: gnu radio on windows

Fri Nov 4 05:23:22 EDT 2016

Try this one: https://www.google.de/url?sa=t&source=web&rct=j&url=http://askubuntu.com/questions/221835/installing-ubuntu-on-a-pre-installed-windows-10-with-uefi/429461%23429461&ved=0ahUKEwiD1KTM4o7QAhXMFywKHeTUB4EQFggiMAM&usg=AFQjCNGdY85rwVF7pXfrDrcW1NyXw01AFQ

Its for ubuntu but it should work for pentoo to

Or just create USB drive with pentoo and you dont need to install anything on your harddrive: https://wiki.gentoo.org/wiki/LiveUSB/Guide

via Newton Mail [https://cloudmagic.com/k/d/mailapp?ct=pa&cv=9.1.5&pv=4.4.2&source=email_footer_2] On Fri, Nov 04, 2016 at 10:01am, Ephraim Ben-Ishai < ephraim4321 at gmail.com [ephraim4321 at gmail.com] > wrote:
Hi,

I ran it on it Pentoo, boot CD and it was ok.

I want to make the laptop dual boot windows 10/Pentoo, do you know of instruction site?

Thanks,

From: Mitja kocjančič [mailto:veso266 at gmail.com]
Sent: Friday, November 4, 2016 10:47 AM
To: Ephraim Ben-Ishai <ephraim4321 at gmail.com>
Cc: hackrf-dev at greatscottgadgets.com
Subject: RE: [Hackrf-dev] FW: gnu radio on windows

Hmm maybe try running it on linux and see if the problem continuous to aphear

via Newton Mail [https://cloudmagic.com/k/d/mailapp?ct=pa&cv=9.1.5&pv=4.4.2&source=email_footer_2]

On Fri, Nov 04, 2016 at 9:08am, Ephraim Ben-Ishai < ephraim4321 at gmail.com [ephraim4321 at gmail.com] > wrote:

Hi,

Any suggestions? No VM, it worked, now does not.

Thanks,

From: Mitja kocjančič [ mailto:veso266 at gmail.com [veso266 at gmail.com] ]
Sent: Thursday, November 3, 2016 9:30 PM
To: Ephraim Ben-Ishai < ephraim4321 at gmail.com [ephraim4321 at gmail.com] >
Cc: hackrf-dev at greatscottgadgets.com [hackrf-dev at greatscottgadgets.com]
Subject: RE: [Hackrf-dev] FW: gnu radio on windows

Are you using vm? As you cant use HackRF in virtual Machine

via Newton Mail [https://cloudmagic.com/k/d/mailapp?ct=pa&cv=9.1.5&pv=4.4.2&source=email_footer_2]

On Thu, Nov 03, 2016 at 7:44am, Ephraim Ben-Ishai < ephraim4321 at gmail.com [ephraim4321 at gmail.com] > wrote:

Hi again,

When running from command line (windows):

C:\Users\ephraim>hackrf_info

Found HackRF board 0:

hackrf_open() failed: HACKRF_ERROR_LIBUSB (-1000)

I get this.

Also, I can’t run the command: osmocom_fft

Thanks,

From: Mitja kocjančič [ mailto:veso266 at gmail.com [veso266 at gmail.com] ]
Sent: Wednesday, November 2, 2016 9:50 PM
To: Ephraim Ben-Ishai < ephraim4321 at gmail.com [ephraim4321 at gmail.com] >
Cc: hackrf-dev at greatscottgadgets.com [hackrf-dev at greatscottgadgets.com]
Subject: RE: [Hackrf-dev] FW: gnu radio on windows

Hi try this: https://github.com/kit-cel/simulink-hackrf/blob/master/README.md [https://github.com/kit-cel/simulink-hackrf/blob/master/README.md]

But I havent been able to compile this on windows so I cant assist you here unfortunately

Is GNU Radio working now?

via Newton Mail [https://cloudmagic.com/k/d/mailapp?ct=pa&cv=9.1.5&pv=4.4.2&source=email_footer_2]

On Wed, Nov 02, 2016 at 8:44pm, Ephraim Ben-Ishai < ephraim4321 at gmail.com [ephraim4321 at gmail.com] > wrote:

Hi,

Ok, its better now, I guess.

Can you assist in the following: setting up HackRF One for Matlab?

Thank you so much.

Ephraim

From: Mitja kocjančič [ mailto:veso266 at gmail.com [veso266 at gmail.com] ]
Sent: Wednesday, November 2, 2016 9:41 PM
To: Ephraim Ben-Ishai < ephraim4321 at gmail.com [ephraim4321 at gmail.com] >
Cc: hackrf-dev at greatscottgadgets.com [hackrf-dev at greatscottgadgets.com]
Subject: RE: [Hackrf-dev] FW: gnu radio on windows

No USB light should stay on all the time maybe try plugging your HackRF into difrent USB Port

via Newton Mail [https://cloudmagic.com/k/d/mailapp?ct=pa&cv=9.1.5&pv=4.4.2&source=email_footer_2]

On Tue, Nov 01, 2016 at 11:35pm, Ephraim Ben-Ishai < ephraim4321 at gmail.com [ephraim4321 at gmail.com] > wrote:

Hi again,

I spoke a bit too soon, after exiting gnu radio, the green usb light goes off, going back to gnu radio, it will not work, unless I unplug, and plug the usb cable, is this the correct behavior?

Thanks,

Ephraim

From: Mitja kocjančič [ mailto:veso266 at gmail.com [veso266 at gmail.com] ]
Sent: Monday, October 31, 2016 3:15 PM
To: Ephraim Ben-Ishai < ephraim4321 at gmail.com [ephraim4321 at gmail.com] >
Cc: hackrf-dev at greatscottgadgets.com [hackrf-dev at greatscottgadgets.com]
Subject: Re: [Hackrf-dev] FW: gnu radio on windows

Try to set device arguments on osmocom source to hackrf=0

via Newton Mail [https://cloudmagic.com/k/d/mailapp?ct=pa&cv=9.1.5&pv=4.4.2&source=email_footer_2]

On Sun, Oct 30, 2016 at 1:32pm, Mitja kocjančič < veso266 at gmail.com [veso266 at gmail.com] > wrote:

Hi wich version of gnuradio did u use? Was it this one: https://github.com/pothosware/PothosSDR/wiki/GNURadio [https://github.com/pothosware/PothosSDR/wiki/GNURadio]

via Newton Mail [https://cloudmagic.com/k/d/mailapp?ct=pa&cv=9.1.5&pv=4.4.2&source=email_footer_2]

On Sun, Oct 30, 2016 at 1:16am, Ephraim Ben-Ishai < ephraim4321 at gmail.com [ephraim4321 at gmail.com] > wrote:

Hi again,

I recorded the session of gnu radio, from opening, compiling and running:

“setting gnuradio environment

** (python.exe:9024): WARNING **: Trying to register gtype 'GMountMountFlags' as enum when in fact it is of type 'GFlags'

** (python.exe:9024): WARNING **: Trying to register gtype 'GDriveStartFlags' as enum when in fact it is of type 'GFlags'

** (python.exe:9024): WARNING **: Trying to register gtype 'GSocketMsgFlags' as enum when in fact it is of type 'GFlags'

C:\Program Files\GNURadio-3.7\lib\site-packages\gnuradio\grc\main.py:43: GtkWarning: Could not find the icon 'gnuradio-grc'. The 'hicolor' theme

was not found either, perhaps you need to install it.

You can get a copy from:

http://icon-theme.freedesktop.org/releases [http://icon-theme.freedesktop.org/releases]

gtk.window_set_default_icon(gtk.IconTheme().load_icon('gnuradio-grc', 256, 0))

<<< Welcome to GNU Radio Companion 3.7.10.1 >>>

Block paths:

C:\Program Files\GNURadio-3.7\share\gnuradio\grc\blocks

Loading: "C:\Users\ephraim\Desktop\hackRF One Tutorial\Lesson1.grc"

Win32; Microsoft Visual C++ version 14.0; Boost_106000; UHD_003.009.003-0-unknown

>>> Done

Generating: 'C:\\Users\\ephraim\\Desktop\\hackRF One Tutorial\\top_block.py'

Generating: 'C:\\Users\\ephraim\\Desktop\\hackRF One Tutorial\\top_block.py'

Executing: C:\Program Files\GNURadio-3.7\gr-python27\python.exe -u C:\Users\ephraim\Desktop\hackRF One Tutorial\top_block.py

Win32; Microsoft Visual C++ version 14.0; Boost_106000; UHD_003.009.003-0-unknown

gr-osmosdr 164a09fc (0.1.5git) gnuradio 3.7.10.1

built-in source types: file osmosdr fcd rtl rtl_tcp uhd hackrf bladerf airspy redpitaya

FATAL: Failed to open HackRF device (-5) HACKRF_ERROR_NOT_FOUND

Trying to fill up 1 missing channel(s) with null source(s).

This is being done to prevent the application from crashing

due to gnuradio bug #528.

gr::pagesize: no info; setting pagesize = 4096 “

please help or direct me to a solution

Ephraim

From: Ephraim Ben-Ishai [ mailto:ephraim4321 at gmail.com [ephraim4321 at gmail.com] ]
Sent: Sunday, October 30, 2016 1:49 AM
To: hackrf-dev at greatscottgadgets.com [hackrf-dev at greatscottgadgets.com]
Subject: gnu radio on windows

Hi,

Following tutorial : https://greatscottgadgets.com/sdr/1/ [https://greatscottgadgets.com/sdr/1/] using HackRF One.

Installed gnuradio for windows, however after compiling the FFT screen is void of signal?

Can you help?

Thanks,

Ephraim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20161104/108ec073/attachment.html>