[Hackrf-dev] Take 2 on firmware

[Dominic Spill]

On 3 July 2017 at 08:53, colin glass via HackRF-dev <
hackrf-dev at greatscottgadgets.com> wrote:
>
> I got my hands on a second hackrf hardware device 2 after I concluded the
fist device was bricked.
> So the led's are better on this device BUT the USB led will not light and
I cannot
> get the device to talk to windows or Linux (Ubuntu).
>
> Now what do I do if I cannot handshake the board and install firmware?
> What am I missing as I cannot find anything on the forums .... kind of
run out of ideas.

Does the board show up when you connect in DFU mode?  Hold down the DFU
button as you connect or reset the HackRF.  It will show up as an "NXP ARM
device" in lsusb output from Linux.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20170703/e48bc334/attachment.html>