[Hackrf-dev] HackRF and SDR Console Vers 3

[Cinaed Simson]

You should post the output from hackrf_info.

That is, we need to be convinced the libraries being used match the
firmware on the HackRF.

The HackRF as a DC offset at the center frequency.

There should always be something at the center frequency - besides the
signal of interest - so you will need to shift the center frequency so
it avoids the signal of interest.

Take a look at

   http://www.greatscottgadgets.com/sdr

-- Cinaed



On 03/02/2017 07:07 AM, James Brown wrote:
> Is anyone using SDR Console to control HackRf?
>  
> I have a problem that is plaguing me and I can’t decided if its SDR
> Console, drivers, or Hack RF hardware.
> 
> A set of signals that show up on the Spectrum display right in the
> middle regardless of the tuning.
> They are not I/Q unbalance (I don’t think), and they appear to be
> modulated in amplitude.
> They are dependent of bandwidth selection but are sensitive to the
> setting of LNA and VGA gain.
> You can see a screen grab here:
> http://www.seti.net/engineering/notebook/volume-11/Chap68/chap68.php
>  
> I’m running Windows 10 64 bit and using SDR Console dated Feb 21 2017,
> 64 bit
>  
> Regards...James Brown
> 
> 
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>