[Hackrf-dev] not so good experience for my first SDR

[mohammed hamoud alkindy]

Actually the lowest rate seating I could set is 8000000 but still getting the over run I will try to check how to change the audio setting to 44.1khz as it show me now it is at 45khz as my card is now set to 44.1khz but I do not know how to change it on my mac yet

 

From: HackRF-dev <hackrf-dev-bounces at greatscottgadgets.com> on behalf of Simon Kennedy <simon at thekennedys.info>
Date: Tuesday, March 14, 2017 at 1:35 AM
To: hackrf-dev <hackrf-dev at greatscottgadgets.com>
Subject: Re: [Hackrf-dev] not so good experience for my first SDR

 

On gqrx choose menu option 'I/O Devices' then change Input Rate to a low rate like 1000000 to change the sample rate to 1 Msps (bandwidth of 1 MHz). Even my Intel Atom powered netbook will work with this sample rate. My quad core i5-2400 handles 20 Mbps (20 MHz bandwidth) well. Once you find a sample rate that works you can increase it until you reach the limit of you processing power.

 

On 13 March 2017 at 19:11, Dominic Spill <dominicgs at gmail.com> wrote:

On 13 March 2017 at 13:09, mohammed hamoud alkindy <mohammed at omantel.net.om> wrote:
>
> Yes I use gqrx and watched the lessons from greatscottgadgets. if gqrx could allow to introduce throttling I would hsve test it but could not see such feature

_______________________________________________ HackRF-dev mailing list HackRF-dev at greatscottgadgets.com https://pairlist9.pair.net/mailman/listinfo/hackrf-dev 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20170314/b756fcd3/attachment.html>