[Hackrf-dev] PHASE CHANGE

[Ernest Matey]

Experts,

I have two hackrfs receiving the *same* voice transmission on FSK -1200bps
I expect and plan to see the same modulation signature from the two systems
of this same signal.
I did *Raw* IQ recording with SDRsharp with the following parametrs.

Tx Freq - 437 MHz
Rx Freq - 437 MHz
Bandwidth - 10 KHz
Samp - 12.5 MHz , 8bit
Black-Harris filter
Freq_correction -     -2ppm

BUT, I do not see the same phase signature of the signal even though I
align the bursts in time.  I expect to see same pattern

*See attached plots of same channel each from the two hackrf systems.*


*What could be done ?*

*Ernest*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20170330/1dadd1b3/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: two hackrf.JPG
Type: image/jpeg
Size: 67814 bytes
Desc: not available
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20170330/1dadd1b3/attachment.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: two hackrf.JPG
Type: image/jpeg
Size: 67814 bytes
Desc: not available
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20170330/1dadd1b3/attachment-0001.jpe>