[Hackrf-dev] HackRF and Spyverter

[web at kobier.id.au]

Hi,

Yes you possibly will damage the spyverter. Though it does have a fairly high level of input attenuation above 65Mhz so it might survive but it certainly won’t do what you are wanting. 

 It is intended to shift a very small level signal up 120Mhz. 

A better course of action would be an amplifier designed to operate at 918Mhz to amplify (and filter) the out put of the hack RF up to the desired level.

Bernie

> On 26 Apr 2018, at 16:03, Mitja kocjančič <veso266 at gmail.com> wrote:
> 
> anyone knows if Spyverter can be used in oposite direction (to transmit a signal on 120,918Mhz and have it output on 918khz) because HackRF is realy weak on theese low frequencies so if it could put a solid 15dbm below 10Mhz it would be great
> but I am afraid to damage my Spyverter if I try this
> PS: Can I uses bias tee from HackRF to power my Spyverter?
> 
> 2018-04-25 23:08 GMT+02:00 Gavin Jacobs <apriljunkbox at hotmail.com <mailto:apriljunkbox at hotmail.com>>:

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20180426/9497d14d/attachment.html>