[Hackrf-dev] Fwd: Disturb a RF signal

[Matteo Terzi]

---------- Forwarded message ----------
From: Brian Gieryk <ke6iyc at mac.com>
Date: 2018-05-10 13:26 GMT+02:00
Subject: Re: [Hackrf-dev] Disturb a RF signal
To: Matteo Terzi <matteo.terzi97 at gmail.com>


That I do not know, sorry!

Brian
KE6IYC

Sent from my iPhone

On May 10, 2018, at 07:25, Matteo Terzi <matteo.terzi97 at gmail.com> wrote:

hi brian,
thanks a lot.
So how can I set a signal 180 degrees out of phase compared to another in
gnu radio?
Thanks for the support

Matteo

2018-05-10 13:07 GMT+02:00 Brian Gieryk <ke6iyc at mac.com>:

> Except your signal needs to be 180 degrees out of phase with the offending
> signal to cancel it out.  If both are identical, they will add...
>
> Brian
> KE6IYC
>
> Sent from my iPhone
>
> On May 10, 2018, at 06:03, Matteo Terzi <matteo.terzi97 at gmail.com> wrote:
>
> Hi all,
> anybody know how can I disturb radio signal with hackrf?
> I'd like to eliminate a certain value of frequency. I read something about
> the radio signal noise and I know that I should use the same frequency,
> same modulation and with a power higher or equal. Is it correct?
> Thanks
>
> Matteo
>
> --
> Matteo TERZI
> Google Gmail Member
>
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
>


-- 
Matteo TERZI
Google Gmail Member




-- 
Matteo TERZI
Google Gmail Member
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20180510/466f10b2/attachment.html>