[Hackrf-dev] Any Pentoo install lessons learned?

[Jay Bougie]

Thanks; Did that/in there now; but perhaps had poor luck of asking while
know one around.

Will try again
On Aug 17, 2014 1:34 PM, "Joshua Marpet" <joshua.marpet at guardedrisk.com>
wrote:

> Get on IRC, Freenode, #Pentoo channel.  Guaranteed answer in about 5
> minutes (so long as somebody's awake)  :)
>
> *Joshua A. Marpet*
>
> Managing Principal
>
> *GuardedRisk*
>
>
>
> *Before the Breach **and **After The Incident!*
>
>
> Cell: (908) 916-7764
>
> Joshua.Marpet @ guardedrisk.com <Joshua.Marpet at guardedrisk.com>
>
> http://www.GuardedRisk.com
>
>
>
>
>
>
> On Sun, Aug 17, 2014 at 12:29 PM, Jay Bougie <jaybougie at gmail.com> wrote:
>
>> Mostly a Pentoo question follows, but figure some in HackRF-dev might
>> have some very current experience here.
>>
>>
>> https://github.com/mossmann/hackrf/wiki/Getting-Started-with-HackRF-and-GNU-Radio
>> points out latest  Pentoo .iso (2014.0-RC3). All seems well in the
>> livecd, and the pentoo-installer prog on the desktop seems to go OK. When
>> booting the post-installed OS seems to be in a near crippled state. Can
>> login, but ability to startX or connect network lacking.  (libXau.so.6
>> missing & eth0 interface not found)
>>
>> Any pointers to getting this installed? (Undocumented steps? Should I use
>> RC2.1 & pentoo-update ? )
>>
>> See this has some additional steps with running pentoo-installer, but
>> unclear if this applies to RC3
>> https://code.google.com/p/pentoo/wiki/PentooInstaller
>>
>>
>>
>>
>> _______________________________________________
>> HackRF-dev mailing list
>> HackRF-dev at greatscottgadgets.com
>> http://nine.pairlist.net/mailman/listinfo/hackrf-dev
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://nine.pairlist.net/pipermail/hackrf-dev/attachments/20140817/9c95f94a/attachment-0001.html>