[Hackrf-dev] bricked hackrf

[Silverfox]

I stand corrected.  It does list in lsusb as OpenMoko, Inc.
Thanks,
Alan

-----Original Message-----
From: Dominic Spill [mailto:dominicgs at gmail.com] 
Sent: Wednesday, February 18, 2015 7:47 AM
To: Silverfox
Cc: Robert Feldner; Michael Ossmann; hackrf-dev
Subject: Re: [Hackrf-dev] bricked hackrf

Hi Alan,

On 18 February 2015 at 15:36, Silverfox <alan.r.hill at gmail.com> wrote:
> I do not know why, but my Jawbreaker board is running the lastest 
> firmware on Mint 17.  It is recognized by the system and operates as 
> expected with every program I've tried.  When I plug it in the OS 
> detects it and identifies it correctly in dmesg.  However, it is not 
> visable in lsub.  I haven't investigated it beyond that but thought I would report my situation.

dmesg will show the device as a Great Scott Gadgets HackRF One because it reads the descriptions from the device:

[24981.046424] usb 3-1: new high-speed USB device number 3 using xhci_hcd [24981.175180] usb 3-1: New USB device found, idVendor=1d50, idProduct=6089 [24981.175191] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [24981.175196] usb 3-1: Product: HackRF One [24981.175202] usb 3-1: Manufacturer: Great Scott Gadgets

When using lsusb HackRF shows up as an OpenMoko device because they gave us the vendor and product ID and lsusb uses a database of IDs.
e.g.:

Bus 003 Device 003: ID 1d50:6089 OpenMoko, Inc.

Is it possible that you've overlooked it in the lsusb output because it's listed as another manufacturer's device?

Thanks,
  Dominic

>
> From: HackRF-dev [mailto:hackrf-dev-bounces at greatscottgadgets.com] On 
> Behalf Of Robert Feldner
> Sent: Wednesday, February 18, 2015 7:15 AM
> To: Michael Ossmann
> Cc: hackrf-dev
> Subject: Re: [Hackrf-dev] bricked hackrf
>
>
>
> hi mike!
>
> i tried with different USB cables, different laptops, windows, linux, 
> android, powered hubs -
>
> no success; the only difference if i plug the hackrf in is that it 
> sounds like a mosquito-app :-(
>
> first i thought the usb-connector has a shortage or a bad contact, but 
> i measured the voltage behind
>
> the connector and it seems ok
>
> thanks,
>
> robert
>
>
>
> 2015-02-18 8:26 GMT+01:00 Michael Ossmann <mike at ossmann.com>:
>
> On Tue, Feb 17, 2015 at 08:21:40PM +0100, Robert Feldner wrote:
>>
>> it does not show up in lsusb, neither with dfu pressed or without:
>>
>> Bus 002 Device 005: ID 1690:0741 Askey Computer Corp. [hex] Bus 002 
>> Device 004: ID 1fea:0022 Bus 002 Device 003: ID 08ff:2550 AuthenTec, 
>> Inc. AES2550 Fingerprint Sensor Bus 002 Device 002: ID 8087:0020 
>> Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 
>> 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 
>> 04f3:01a4 Elan Microelectronics Corp. Wireless Keyboard Bus 001 
>> Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 
>> 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>
>> and with dmesg i cant see any difference if i plug it in or out :-(
>
> Can you confirm that you see nothing different if the DFU button is 
> held down while plugging in the HackRF?  Also please try with a 
> different USB cable just in case that is the problem.
>
> Thanks,
>
> Mike
>
>
>
> ________________________________
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2015.0.5646 / Virus Database: 4284/9137 - Release Date: 
> 02/18/15
>
>
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.5646 / Virus Database: 4284/9137 - Release Date: 02/18/15