[Hackrf-dev] using hackrf with the raspberry Pi 2

[kd5wdq .]

Somewhere there's a procedure to build GNU radio on the PI.
It requires making temp swap space - otherwise it fails.  I've used
this procedure and it works.

Be prepared to let it spend several hours building.

--eddie (af5sa)

On Tue, Mar 24, 2015 at 3:55 AM, Graham <graham at watchguard.biz> wrote:

>  Thanks Mike
> I will check it out now :-)
> Cheers Graham
>
>
> On 24/03/15 17:14, Mike Carden wrote:
>
>
> On Tue, Mar 24, 2015 at 5:43 PM, Graham <graham at watchguard.biz> wrote:
>
>> Has  anyone tried using the hackrf with the new raspberry pi 2.
>
>
>  Hi Graham.
>
>  This chap has posted some notes on getting gnuradio going on a Pi 2,
> though his interest seems to have been in an rtl-sdr dongle, but I suspect
> it might get you most of the way there:
>
>
> http://www.rs-online.com/designspark/electronics/eng/blog/taking-the-raspberry-pi-2-for-a-test-drive-with-gnu-radio-2?/designspark/electronics/blog/taking-the-raspberry-pi-2-for-a-test-drive-with-gnu-radio-2=
>
>  My Pi 2 is busy doing ADSB with the new R820T-2 dongle so I haven't
> plugged the HackRF into it yet
>
>  --
> MC
>
>
>
>
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20150324/71f24332/attachment.html>