[Hackrf-dev] Newbie question.

[Hello Gpio]

You would likely need to demodulate the signal to identify the operator.

This has been done before:
https://github.com/gearmover/hackrf-gsm
https://github.com/JiaoXianjun/LTE-Cell-Scanner

If all you want to do is determine signal strength of a known carrier, then
you will need to calibrate the HackRF and do it via an FFT.

-Nick
http://gpio.com

On Thu, Jun 23, 2016 at 6:04 AM, Kasper Nielsen <kasp.niel at gmail.com> wrote:

> I would like to know if I can use the HackRF One as an analyser of
> GSM/3G/4G signal strength throughout the country?
>
> So if I drive around I can scan and see network strength of the various
> telecom operators in a given area.
>
> I know it is a very newbie question, but I hope you can help.
>
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20160623/32539c3d/attachment.html>