[Hackrf-dev] Newbie question.

[n0p [Luis Bernal]]

In my country you can guess which operator is by just knowing the region
and frequency since they are all assigned by the goverment. It should be
like that in your country too

2016-06-24 2:32 GMT+02:00 Hello Gpio <hellogpio at gmail.com>:

> You would likely need to demodulate the signal to identify the operator.
>
> This has been done before:
> https://github.com/gearmover/hackrf-gsm
> https://github.com/JiaoXianjun/LTE-Cell-Scanner
>
> If all you want to do is determine signal strength of a known carrier,
> then you will need to calibrate the HackRF and do it via an FFT.
>
> -Nick
> http://gpio.com
>
> On Thu, Jun 23, 2016 at 6:04 AM, Kasper Nielsen <kasp.niel at gmail.com>
> wrote:
>
>> I would like to know if I can use the HackRF One as an analyser of
>> GSM/3G/4G signal strength throughout the country?
>>
>> So if I drive around I can scan and see network strength of the various
>> telecom operators in a given area.
>>
>> I know it is a very newbie question, but I hope you can help.
>>
>> _______________________________________________
>> HackRF-dev mailing list
>> HackRF-dev at greatscottgadgets.com
>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>>
>>
>
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20160624/8b7b39fa/attachment.html>