[Hackrf-dev] General usage

[Rustu Yucel]

Hi all, which amplifier can you suggest on this purpose?

On Mon, Jan 30, 2017 at 1:38 PM, Vedad Ramovic <vedad.ramovic at bstelecom.ba>
wrote:

> Hello Mitja,
>
> Thank you for very fast answer.
>
>
>
> As for amplifier I do have it.
>
> As for needing 2 hackRFs for FM repeater. Could you please explain bit
> more or even better send me some sketch that explains it, because I did not
> understand?
>
>
>
> Best regards,
>
> Vedad
>
>
>
>
>
> *From:* Mitja kocjančič [mailto:veso266 at gmail.com]
> *Sent:* Monday, January 30, 2017 11:20 AM
> *To:* Vedad Ramovic <vedad.ramovic at bstelecom.ba>
> *Cc:* hackrf-dev at greatscottgadgets.com
> *Subject:* Re: [Hackrf-dev] General usage
>
>
>
> [image: Image removed by sender.]You would need to use 2 hackRFs for FM
> repeater becauee HackRF in only half-duplex (can't transmitt and recieve at
> the same time) and you would also need an amplifier because hackRF has only
> 32mW of output power
>
> via Newton Mail
> <https://cloudmagic.com/k/d/mailapp?ct=pa&cv=9.1.5&pv=4.4.2&source=email_footer_2>
>
> On Mon, Jan 30, 2017 at 10:45am, Vedad Ramovic <vedad.ramovic at bstelecom.ba>
> wrote:
>
>
>
> Hello,
>
> I have a system that retransmits few FM signals in an area without FM
> signal.
>
> I have FM amplifier that is tuned to two frequencies for retransmission.
>
> This amplifier SDR module (which excluded all noise and other signals
> apart those two FM signal) that comes before amplifier, stopped working.
>
> Can I use your RSP instead of existing SDR module?
>
> RSP should pass (filter) only one or two FM signals from its input to its
> output without any demodulation and without computer.
>
> Thanks,
>
> Vedad
>
>
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20170130/671af38a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 464 bytes
Desc: not available
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20170130/671af38a/attachment.jpg>