[Hackrf-dev] No way to get USB to talk to the board and flash the device

[Fernando]

Try and post the output of the syslog

regards




On 08/05/17 16:18, colin glass wrote:
> Are there any other means of flashing the rom other than via the USB
> Fernando?
> Permissions problems come from what source Fernando?
>
> I have circled like a bird of prey around the FAQ's each resulting in
> no connection.
> Many thanks
> Colin
>
> ------------------------------------------------------------------------
> *From:* Fernando <fernando at samara.com.es>
> *To:* colin glass <cgabcd1234 at yahoo.co.uk>;
> "hackrf-dev at greatscottgadgets.com" <hackrf-dev at greatscottgadgets.com>
> *Sent:* Monday, 8 May 2017, 15:03
> *Subject:* Re: [Hackrf-dev] No way to get USB to talk to the board and
> flash the device
>
> a error of hackrf_info may be because permission problems.
> If the device does not show on syslog the problem will be worse.
> If your device is show as recognized in syslog, try this
> https://github.com/mossmann/hackrf/wiki/FAQ
>
> regards
>
>
> On 08/05/17 14:36, colin glass wrote:
>> Thanks Fernando
>> I tend to get this ...
>> hackrf_open() failed: HACKRF_ERROR_NOT_FOUND (-5)
>> ubuntu at ubuntu:~/Downloads/hackrf-2017.02.1/firmware-bin$
>> <mailto:ubuntu at ubuntu:%7E/Downloads/hackrf-2017.02.1/firmware-bin$>
>> hackrf_info
>> No HackRF boards found.
>>
>> but let me try your script
>> Colin
>>
>> ------------------------------------------------------------------------
>> *From:* Fernando <fernando at samara.com.es> <mailto:fernando at samara.com.es>
>> *To:* colin glass <cgabcd1234 at yahoo.co.uk>
>> <mailto:cgabcd1234 at yahoo.co.uk>; "hackrf-dev at greatscottgadgets.com"
>> <mailto:hackrf-dev at greatscottgadgets.com>
>> <hackrf-dev at greatscottgadgets.com>
>> <mailto:hackrf-dev at greatscottgadgets.com>
>> *Sent:* Monday, 8 May 2017, 0:20
>> *Subject:* Re: [Hackrf-dev] No way to get USB to talk to the board
>> and flash the device
>>
>> if you open a terminal and type
>>
>> sudo tail -f /var/log/syslog
>>
>>
>> and then you plug in your hackrf
>>
>> you should get something like this
>>
>>
>> May  3 00:34:08 FPGAwars kernel: [202113.781179] usb 3-1: new
>> high-speed USB device number 11 using xhci_hcd
>> May  3 00:34:08 FPGAwars kernel: [202114.102805] usb 3-1: New USB
>> device found, idVendor=1d50, idProduct=6089
>> May  3 00:34:08 FPGAwars kernel: [202114.102810] usb 3-1: New USB
>> device strings: Mfr=1, Product=2, SerialNumber=4
>> May  3 00:34:08 FPGAwars kernel: [202114.102812] usb 3-1: Product:
>> HackRF One
>> May  3 00:34:08 FPGAwars kernel: [202114.102813] usb 3-1:
>> Manufacturer: Great Scott Gadgets
>> May  3 00:34:08 FPGAwars kernel: [202114.102815] usb 3-1:
>> SerialNumber: 000000000000000071c469c825671743
>> May  3 00:34:12 FPGAwars mtp-probe: checking bus 3, device 11:
>> "/sys/devices/pci0000:00/0000:00:15.0/0000:03:00.0/usb3/3-1"
>> May  3 00:34:12 FPGAwars mtp-probe: bus: 3, device: 11 was not an MTP
>> device
>>
>>
>> regards
>>
>>
>>
>>
>>
>>
>> On 08/05/17 00:15, colin glass wrote:
>>> gnuradio bootable from a memory stick....
>>> I have tried to access it via W10 and Zaddig too ...
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>> *From:* Fernando <fernando at samara.com.es>
>>> <mailto:fernando at samara.com.es>
>>> *To:* hackrf-dev at greatscottgadgets.com
>>> <mailto:hackrf-dev at greatscottgadgets.com>
>>> *Sent:* Sunday, 7 May 2017, 22:38
>>> *Subject:* Re: [Hackrf-dev] No way to get USB to talk to the board
>>> and flash the device
>>>
>>> What operating system are you using?
>>>
>>>
>>> On 07/05/17 22:49, colin glass via HackRF-dev wrote:
>>>> So I have had my hackers for 3 months and it sat in a box.
>>>> I plugged it into my laptop and tried a variety of ways to talk 
>>>> to hit via USB including a powered USB. 
>>>>
>>>> However, I am worried I simply have a brick as I cannot flash the
>>>> device
>>>> and therefore cannot access and use all its wonderful features!
>>>>
>>>> Any help/thoughts/advice?
>>>>
>>>> thanks so much
>>>> 73's M0HYH Colin
>>>>
>>>>
>>>> _______________________________________________
>>>> HackRF-dev mailing list
>>>> HackRF-dev at greatscottgadgets.com
>>>> <mailto:HackRF-dev at greatscottgadgets.com>
>>>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>>>
>>> _______________________________________________
>>> HackRF-dev mailing list
>>> HackRF-dev at greatscottgadgets.com
>>> <mailto:HackRF-dev at greatscottgadgets.com>
>>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>>>
>>>
>>
>>
>>
>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20170508/d321d1f0/attachment.html>