[Hackrf-dev] RX/TX switching

[Matteo Terzi]

Hi all,
I'm developing my flow with GRC and I need a hand. The flow is almost
finished.
I'm able to acquire a signal and in the same program, I switch in TX mode
by means of a "wx gui chooser" to re-produce the signal. The problem is
that my hackrf doesn't switch in TX mode and so, I can see the signal on
the "fft sink" but my device doesn't transmit. Do I have to use any driver
(soapy)? Which could be the problem?
Take a look at the attachment to better understand the problem.
Thanks
Matteo

-- 
Matteo TERZI
Google Gmail Member
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20180412/fafee049/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sink.png
Type: image/png
Size: 92942 bytes
Desc: not available
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20180412/fafee049/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: source.png
Type: image/png
Size: 97539 bytes
Desc: not available
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20180412/fafee049/attachment-0001.png>