[Hackrf-dev] Fwd: RX/TX switching

[Matteo Terzi]

---------- Forwarded message ----------
From: Matteo Terzi <matteo.terzi97 at gmail.com>
Date: 2018-04-12 18:09 GMT+02:00
Subject: Re: [Hackrf-dev] RX/TX switching
To: i2NDT <i2ndt at yahoo.it>


Hi Claudio,
Which could be the problem? lack of libraries in windows or what else?
which is centre of this defect on this operating system?
Thanks
Matteo


2018-04-12 17:40 GMT+02:00 i2NDT <i2ndt at yahoo.it>:

> Matteo,
> if you are using Windows you will never be able to transmit!
> as far as I know...only Linux allows GnuRadio and HackRF One to transmit!..
>
> i2NDT Claudio
>
>
>
>
> i2NDT's Web Site <http://digilander.libero.it/i2ndt/>
> *i2NDT's Grabber Compendium*
> <http://digilander.libero.it/i2ndt/grabber/grabber-compendium.htm>
>
>
> Il Giovedì 12 Aprile 2018 16:55, Matteo Terzi <matteo.terzi97 at gmail.com>
> ha scritto:
>
>
> Hi all,
> I'm developing my flow with GRC and I need a hand. The flow is almost
> finished.
> I'm able to acquire a signal and in the same program, I switch in TX mode
> by means of a "wx gui chooser" to re-produce the signal. The problem is
> that my hackrf doesn't switch in TX mode and so, I can see the signal on
> the "fft sink" but my device doesn't transmit. Do I have to use any driver
> (soapy)? Which could be the problem?
> Take a look at the attachment to better understand the problem.
> Thanks
> Matteo
>
> --
> Matteo TERZI
> Google Gmail Member
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
>
>


-- 
Matteo TERZI
Google Gmail Member



-- 
Matteo TERZI
Google Gmail Member
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20180412/4a2bc6e0/attachment.html>