[Hackrf-dev] Broken hackrf one

[Andrew Onyshchuk]

Hi everyone.

My hackrf one suddenly stopped working.
When I try rx (or tx) I don't receive any samples and hackrf stops
responding/ all 6 LED are on.
Flashing different firmware doesn't help (using DFU as well).
Same on different computers and different cables.
The md5 of firmware from the device matches the .bin file.

$ hackrf_info
hackrf_info version: git-90d3f7f
libhackrf version: git-90d3f7f (0.5)
Found HackRF
Index: 0
Serial number: 000000000000000014d463dc2fa077e1
Board ID Number: 2 (HackRF One)
Firmware Version: 2018.01.1 (API:1.02)
Part ID Number: 0xa004cb3c 0x005e4f3e

$ hackrf_transfer -f 415000000 -r /dev/null
call hackrf_set_sample_rate(10000000 Hz/10.000 MHz)
call hackrf_set_freq(415000000 Hz/415.000 MHz)
Stop with Ctrl-C
0.0 MiB / 1.003 sec = 0.0 MiB/second

Couldn't transfer any bytes for one second.

Exiting... hackrf_is_streaming() result: HACKRF_TRUE (1)
Total time: 1.00293 s

$ hackrf_info
hackrf_info version: git-90d3f7f
libhackrf version: git-90d3f7f (0.5)
Found HackRF
Index: 0
hackrf_board_id_read() failed: Input/Output Error (-1000)

Looks like a hardware failure?

Thanks in advance for any suggestions/assistance
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20180521/ed942aa4/attachment.html>