[Hackrf-dev] Broken hackrf one

[Dominic Spill]

Hi Andrew,

Is the HackRF permanently in this state?  Or does it switch from responding
to hackrf_info to not responding only after you try using hackrf_transfer?

Thanks,
  Dominic

On 21 May 2018 at 16:43, Andrew Onyshchuk <andryk.rv at gmail.com> wrote:

> Hi everyone.
>
> My hackrf one suddenly stopped working.
> When I try rx (or tx) I don't receive any samples and hackrf stops
> responding/ all 6 LED are on.
> Flashing different firmware doesn't help (using DFU as well).
> Same on different computers and different cables.
> The md5 of firmware from the device matches the .bin file.
>
> $ hackrf_info
> hackrf_info version: git-90d3f7f
> libhackrf version: git-90d3f7f (0.5)
> Found HackRF
> Index: 0
> Serial number: 000000000000000014d463dc2fa077e1
> Board ID Number: 2 (HackRF One)
> Firmware Version: 2018.01.1 (API:1.02)
> Part ID Number: 0xa004cb3c 0x005e4f3e
>
> $ hackrf_transfer -f 415000000 -r /dev/null
> call hackrf_set_sample_rate(10000000 Hz/10.000 MHz)
> call hackrf_set_freq(415000000 Hz/415.000 MHz)
> Stop with Ctrl-C
> 0.0 MiB / 1.003 sec = 0.0 MiB/second
>
> Couldn't transfer any bytes for one second.
>
> Exiting... hackrf_is_streaming() result: HACKRF_TRUE (1)
> Total time: 1.00293 s
>
> $ hackrf_info
> hackrf_info version: git-90d3f7f
> libhackrf version: git-90d3f7f (0.5)
> Found HackRF
> Index: 0
> hackrf_board_id_read() failed: Input/Output Error (-1000)
>
> Looks like a hardware failure?
>
> Thanks in advance for any suggestions/assistance
>
> _______________________________________________
> HackRF-dev mailing list
> HackRF-dev at greatscottgadgets.com
> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20180524/a78140d0/attachment.html>