[Hackrf-dev] Broken hackrf one
Andrew Onyshchuk
andryk.rv at gmail.com
Thu May 24 22:33:06 EDT 2018
Hi Dominic,
It becomes unresponsive only after I try using hackrf_transfer.
After that it is completely unresponsive and only rebooting/reconnecting
helps.
I'm guessing the ARM chip crashes or turns off. Maybe power supply issue?
Thanks,
Andrew
On Thu, May 24, 2018 at 7:31 PM Dominic Spill <dominicgs at gmail.com> wrote:
> Hi Andrew,
>
> Is the HackRF permanently in this state? Or does it switch from
> responding to hackrf_info to not responding only after you try using
> hackrf_transfer?
>
> Thanks,
> Dominic
>
> On 21 May 2018 at 16:43, Andrew Onyshchuk <andryk.rv at gmail.com> wrote:
>
>> Hi everyone.
>>
>> My hackrf one suddenly stopped working.
>> When I try rx (or tx) I don't receive any samples and hackrf stops
>> responding/ all 6 LED are on.
>> Flashing different firmware doesn't help (using DFU as well).
>> Same on different computers and different cables.
>> The md5 of firmware from the device matches the .bin file.
>>
>> $ hackrf_info
>> hackrf_info version: git-90d3f7f
>> libhackrf version: git-90d3f7f (0.5)
>> Found HackRF
>> Index: 0
>> Serial number: 000000000000000014d463dc2fa077e1
>> Board ID Number: 2 (HackRF One)
>> Firmware Version: 2018.01.1 (API:1.02)
>> Part ID Number: 0xa004cb3c 0x005e4f3e
>>
>> $ hackrf_transfer -f 415000000 -r /dev/null
>> call hackrf_set_sample_rate(10000000 Hz/10.000 MHz)
>> call hackrf_set_freq(415000000 Hz/415.000 MHz)
>> Stop with Ctrl-C
>> 0.0 MiB / 1.003 sec = 0.0 MiB/second
>>
>> Couldn't transfer any bytes for one second.
>>
>> Exiting... hackrf_is_streaming() result: HACKRF_TRUE (1)
>> Total time: 1.00293 s
>>
>> $ hackrf_info
>> hackrf_info version: git-90d3f7f
>> libhackrf version: git-90d3f7f (0.5)
>> Found HackRF
>> Index: 0
>> hackrf_board_id_read() failed: Input/Output Error (-1000)
>>
>> Looks like a hardware failure?
>>
>> Thanks in advance for any suggestions/assistance
>>
>> _______________________________________________
>> HackRF-dev mailing list
>> HackRF-dev at greatscottgadgets.com
>> https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist9.pair.net/pipermail/hackrf-dev/attachments/20180524/84d37e44/attachment.html>
More information about the HackRF-dev
mailing list